液體自動混合裝置設計典例

『壹』 PLC問題，液體自動混合裝置通電初始，閥門Y1、Y2、Y3關閉，Y4打開10秒，將容器內殘留液放空。

這個一般沒人給你寫，除非給報酬。

『貳』 摘要翻譯，不要工具翻譯的

With the development of economy and the progress of the society, requirements for automatic instrial proction continued to improve. In medicine, food, chemical instries, often need to put more dangerous liquid toxic, flammable and explosive necessary processing in time and in the right conditions so as to obtain a proct, but these processes have been carried out in human monitoring or manual operation, so that the working environment is very bad. The design of the main use of PLC to achieve the control device and the configuration of the three kinds of liquid mixture as an example, device parameter set through PLC automatic mixed automatic operation completion fluid, reces the risk of manual operation. This paper introces the basic design requirements of various liquids automatic mixing and technical analysis, and also introces the control technology of PLC and configuration, and mainly on the "design of the automatic mixing device control and configuration of various liquid" PLC implementation is analyzed and discussed based on. The instrial design using programmable logic controller (PLC) and configuration (Configure) automatic control technology to solve instrial monitoring a variety of automatic liquid mixing control problems. Using a combination of PLC control and configuration monitoring technology, to realize the automatic process of three or more liquids in certain proportion are added in mixing, stirring, heating device and emissions. The design of the three kinds of liquid mixture as an example, the main elements of the design include: analysis and design of electrical principle diagram of process analysis and arrangement, device control and configuration of the design, hardware connection and connection, the trapezoidal chart analysis and design, design and analysis of defects and its situation. After a number of debugging and modification, the design realizes the automatic add liquid, automatic mixing, automatic heating and automatic control function of multi liquid mixing device, but also realizes the manual and automatic switch or a combination of function. In addition, this paper also discusses the difficulties encountered in the design, the design of the shortcomings and the foreground of the design.

『叄』 請教PLC高手，求一個設計程序！

你這個是很簡單的程序設計,請問你使用的是什麼PLC,你先把PLC埠定義好,才能寫程序的.

『肆』 急，多種液體自動混合裝置簡介及其工作原理

那得看你是什麼樣的液體、有什麼性質、是否有腐蝕性、是否放熱、是否生成沉澱、是否變粘稠、用量多少、投放方式、攪拌方式、放液方式等來決定混合裝置的材質、動力方式、結構等。

『伍』 用PLC300系列（PLC313C）編寫下列任務程序。

直接談錢吧，要不學PLC都回餓死的。想好了聯系我，可以直接遠程傳程序到PLC里。

『陸』 2種液體自動均勻混合PLC控制系統設計（請教各位前輩多多指教幫助）

也不要請教道這樣無恥的地步啦，這種做法其實是領了項目叫別人白幹活，誰會這么傻呀，有活賺錢也應該考慮一下人家做技術人員的吃飯問題啦

『柒』 兩種液體混合裝置PLC控製程序設計

2. 控制要求：有兩種液體A、B需要在容器中混合成液體C待用，PLC開始運行時清空容器。（1）按下啟動信號內，閥門A打開，注入液體A；到達I位置時，閥門A關閉，閥門B打開，注入液體B；到達H時，閥門B關閉，容器內液體進行攪拌，5s正轉，4s反轉，循環3次後停止攪拌，開容始加熱，15s後停止加熱；打開閥門閥門C，釋放液體C；當最低位液位感測器L=0時，關閉閥門進入下一個循環。（2）按下暫停按鈕,要求停止攪拌，停止加熱；按下繼續按鈕要求系統從剛才暫停處接著運行。（3）按下停止按鈕，所以操作都停止，並且將容器內的液體全部釋放完，然後關閉閥門C。 3. 按照要求編寫程序並模擬調試。

『捌』 西門子PLC，s7-200.兩種液體混合攪拌控制，其功能要求如下：

你是要程序還是要什麼？ 你這個只是簡單的邏輯控制 好好想想 不難寫