多種液體自動混合裝置如

① 如圖所示為三種液體混合裝置，SQl、SQ2、SQ3和SQ4為液面感測器，液面淹沒 時接通，液體A、B、C與混合液閥

最近沒空。，。。如果有時間等的話到12月中給你弄

② 100分真心求，歐姆龍PLC兩種液體自動混合裝置，梯形圖 I/O接線圖

..........

③ 摘要翻譯，不要工具翻譯的

With the development of economy and the progress of the society, requirements for automatic instrial proction continued to improve. In medicine, food, chemical instries, often need to put more dangerous liquid toxic, flammable and explosive necessary processing in time and in the right conditions so as to obtain a proct, but these processes have been carried out in human monitoring or manual operation, so that the working environment is very bad. The design of the main use of PLC to achieve the control device and the configuration of the three kinds of liquid mixture as an example, device parameter set through PLC automatic mixed automatic operation completion fluid, reces the risk of manual operation. This paper introces the basic design requirements of various liquids automatic mixing and technical analysis, and also introces the control technology of PLC and configuration, and mainly on the "design of the automatic mixing device control and configuration of various liquid" PLC implementation is analyzed and discussed based on. The instrial design using programmable logic controller (PLC) and configuration (Configure) automatic control technology to solve instrial monitoring a variety of automatic liquid mixing control problems. Using a combination of PLC control and configuration monitoring technology, to realize the automatic process of three or more liquids in certain proportion are added in mixing, stirring, heating device and emissions. The design of the three kinds of liquid mixture as an example, the main elements of the design include: analysis and design of electrical principle diagram of process analysis and arrangement, device control and configuration of the design, hardware connection and connection, the trapezoidal chart analysis and design, design and analysis of defects and its situation. After a number of debugging and modification, the design realizes the automatic add liquid, automatic mixing, automatic heating and automatic control function of multi liquid mixing device, but also realizes the manual and automatic switch or a combination of function. In addition, this paper also discusses the difficulties encountered in the design, the design of the shortcomings and the foreground of the design.

④ 基於MCGS觸摸屏的多種液體混合裝置監控系統設計連線時的注意事項

摘要 為進一步提高PLC實驗台對多種液體混合過程式控制制的精度，實現實驗的精細化處理，本文引入了MCGS上位機監控系統組態軟體，通過對MCGS工程組態軟體的功能和特點進行闡述和分析，在本設計的梯形圖設計中是大量運用計時器和順序控制繼電器指令來完成的。在PLC程序設計的基礎上結合有關的外圍設備形成一個易於工業控制的系統整體，在易於擴展其功能的原則而設計。本監控系統採用PLC為控制核心，具備自動混合兩種液體的功能， 由感測器檢測儲藏罐中的液面高度，按順序加入A和B兩種液體，攪拌40s後放出混合液體。過程監控上，我們採用的是MCGS組態軟體，這是我國自主研發的組態軟體，適用於各品牌的PLC。在課程設計中主要進行的是設備的基本機構圖，混合裝置控制的模擬實驗面板圖，PLC的選型，外部硬體接線圖，以及繪制所要實現的功能圖，進而在GX_Developer與GX.Simulator中模擬調試，輸出對應的指令表；在MCGS中設計監控的人機界面，對於儲藏罐以及感測器和電磁閥和流動塊的屬性設置，同時繪制歷史報表，最後將PLC中的程序同步到MCGS中，進行模擬調試，實現界面的實時監控，以及歷史數據和曲線的實時監測

⑤ 多種液體自動混合PLC控制的梯形圖

什麽都沒有
要求、流程、甚至幾個執行機構、什麽機構都沒有
神仙可能會知道怎麼回答

⑥ 多種液體自動混合控制系統在國內外的發展前景怎麼樣

前景非常廣闊，在各行業都有所體現。例如：在化學中往往需要將兩種或兩種以上的液體混合均勻，才能實現正常的實驗需求。在混合油漆等化學用品時，需要混合均勻才能實現好的效果，而人工卻不能實現。

⑦ PLC問題：多種液體自動混合

看不清就留郵箱，一會發給你！