液體混合裝置的plc控制系統設計

⑴ 兩種液體混合裝置PLC控制系統要求 求大神 給高分 急需！！！

我回去幫做下看看 qq904015798

輸入：

xo啟動按鈕
x1液位I處感測器（因為一開始感測器檢測到X1液位I處，所以開始時X1要先為ON）

x2液位H處感測器
x360度時的感測器
x4最低位液位感測器（有液體時動作）

X5停止按鈕

輸出：

y0閥門x1打開
y1閥門x2打開
y2加熱器加熱
y3閥門3打開

指令表：

⑵ 液體混合裝置的PLC控制系統 求論文設計

用步進指令寫吧，比較簡單。網上有很多這樣的例子，你可以找找，如果找不到我發給你！

⑶ 兩種液體混合裝置PLC控製程序設計

2. 控制要求：有兩種液體A、B需要在容器中混合成液體C待用，PLC開始運行時清空容器。（1）按下啟動信號內，閥門A打開，注入液體A；到達I位置時，閥門A關閉，閥門B打開，注入液體B；到達H時，閥門B關閉，容器內液體進行攪拌，5s正轉，4s反轉，循環3次後停止攪拌，開容始加熱，15s後停止加熱；打開閥門閥門C，釋放液體C；當最低位液位感測器L=0時，關閉閥門進入下一個循環。（2）按下暫停按鈕,要求停止攪拌，停止加熱；按下繼續按鈕要求系統從剛才暫停處接著運行。（3）按下停止按鈕，所以操作都停止，並且將容器內的液體全部釋放完，然後關閉閥門C。 3. 按照要求編寫程序並模擬調試。

⑷ 高分求翻譯

Using PLC as the controlling core of the system, this design completed the mixing function of the three liquid automatic. This design achieved according to three kinds of exact proportion of liquid mixture, stir the motor will mix the Yeti the output from the Rong Qi, and form Xunhuan state, even after the press stop button to Wancheng the end of the second mixed Caineng the Mudi. Repeatedly verified by simulation in the laboratory, proves that the design entirely feasible, and the mixing ratio of this system enhances the accuracy and effectiveness. Since the system uses the anti-corrosion device, so corrosive chemical instry has a good practical value.

A variety of liquid mixing device Intelligent Control System

This design uses PLC to control the core of the system, the completion of three liquid automatic mixing function. This design achieved according to three kinds of exact proportion of liquid mixture, stir the motor will mix the Yeti the output from the Rong Qi, and form Xunhuan state, even after the press stop button to Wancheng the end of the second mixed Caineng the Mudi. Repeatedly verified by simulation in the laboratory, proves that the design entirely feasible, and the mixing ratio of this system enhances the accuracy and effectiveness. Since the system uses the anti-corrosion device, so corrosive chemical instry has a good practical value.

Many kinds of liquid mixing arrangement intelligent control system design

This design uses PLC is control system's core, has completed three kind of liquid automatic mix function. This design achieved has let three kind of liquid precise proportionate mixes, after electric motor agitation will mix the liquid output from the vessel, and formed the recurrent state, still in pressed the stop after turning wants the goal which a cost mix could end. Through confirms repeatedly in the laboratory simulation, proves the Ming dynasty printed books design to be completely feasible, and this system enhanced the proportion of mixture precision and the working efficiency. Because this system has used the corrosion preventing component, therefore is having the corrosive chemical instry to have the very good use value.

⑸ 跪求液體混合裝置的PLC控制系統

Network1

LDM0.6

AM0.7

OI_SB3

OSM0.1

MOVB0,MB0

Network2

LDM0.6

ANM0.7

OI_SB1

OM0.0

ANM0.1

=M0.0

Network3

LDM0.0

AI_SQ3

OM0.1

ANM0.2

=M0.1

Network4

LDM0.1

AI_SQ2

OM0.2

ANM0.3

=M0.2

Network5

LDM0.2

AI_SQ1

OM0.3

ANM0.4

=M0.3

Network6

LDM0.3

AT37

OM0.4

ANM0.5

=M0.4

Network7

LDM0.4

ANI_SQ4

OM0.5

ANM0.6

=M0.5

Network8

LDM0.5

AT38

OM0.6

ANM0.0

=M0.6

Network9

LDI_SB2

OM0.7

=M0.7

NetworkX+

LDM0.0=Q_YV1

LDM0.1=Q_YV2

LDM0.2=Q_YV3

LDM0.3=Q_MTONT37,200

LDM0.4OM0.5=Q_YV4

LDM0.5TONT38,50

LDQ_M=Q_L5

LDI_SQ4ANI_SQ1ANI_SQ2ANI_SQ3=Q_L4

LDI_SQ3ANI_SQ1ANI_SQ2=Q_L3

LDI_SQ2ANI_SQ1=Q_L2

LDI_SQ1=Q_L1