『壹』 基于单片机的gps定位信息系统的设计要求
因为你这个系统的设计主要是针对单片机的GPS，所以无论是单片机还是GPS，这两个技术要点一定要实现。
『贰』 请问如何用单片机实现GPS功能
主程序功能为51单片机通过串口向GPS模块GARMIN GPS 25LP发送命令，读取当前的方位信息，根据方位信息数据结构的特点，接收GPS模块送入单片机串口的经度数据，关于纬度数据的接收，程序实现代码结构和经度数据接收程序代码类似处理即可。
『叁』 基于单片机的GPS定位系统
买那种串口的GPS，单片机用串口和GPS模块通讯，去推一下度娘，例子很多的。。
串口上来的数据串里有经纬度，提取出来塞给LCD什么的，说着比较容易的。。
PS:宣传一下， 中国电子DIY之家欢迎你，大家在往上拱资料。。
『肆』 用单片机怎样做一个gps定位装置能能用手机看gps的位置，求教程
这个似乎有点难度，这样吧，方便起见，买个GPS模块，再买个GSM模块办张电话卡塞到GSM模块里，用单片机接收GPS的信息，一般都是RS-232接口的，GSM模块专管通讯，也接到单片机上，然后以短信的形式通过电信或者联通的网络发送到你的手机上，OK了，如果想看到具体位置的话还需要在手机上开发个地图和GPS信息的定位软件，就这个样子。
『伍』 利用51单片机实现GPS定位，并在LED屏显示经纬度，用汇编语言编程
你这个要求太高了吧。我给公司设计这样一个程序他给我五千。当然你这个问题我会。但是我只想帮你把显示部分写写，前提是你已经测好数据了。需要再留言说明
『陆』 如何通过51单片机实现GPS定位功能
GPS不需要驱动程序，只需要单片机用串口不停的接收程序并且解包就可以了。
『柒』 能不能基于单片机设计一个GPS定位显示系统，显示器能显示所在地点的经纬度和所在地的地名
当然可以，如果只是显示经纬度的话完全可以，如果是要显示实时地图的话，就需要一款强大一点的单片机，其实强大一点呢只是用来处理地图数据而已
『捌』 基于51单片机的GPS定位 程序
额····跟我毕业设计正在做的一样啊。我给你资料，不过我也看不大懂啊。
;12864（带字库汉字显示演示程序）
;***************************************************************************
;* [email protected] (51c51 test web) www.8951.com *
;* Create by :石学军 www.51c51.com 更多例程请登陆网站 *
;***************************************************************************
RS EQU P2.0
RW EQU P2.1
E EQU P2.2
PSB EQU P2.3
RST EQU P2.5
;-----------------------------------------------
LCD_X EQU 30H
LCD_Y EQU 31H
COUNT EQU 32H
COUNT1 EQU 33H
COUNT2 EQU 34H
COUNT3 EQU 35H
;-----------------------------------------------
LCD_DATA EQU 36H
LCD_DATA1 EQU 37H
LCD_DATA2 EQU 38H
STORE EQU 39H
;-----------------------------------------------
ORG 0000H
LJMP MAIN
ORG 0100H
;-----------------------------------------------
MAIN:
MOV SP,#5FH
CLR RST ;复位
LCALL DELAY4
SETB RST
NOP
SETB PSB ;通讯方式为8位数据并口
;********************初始化**********************
LGS0: MOV A,#34H ;34H--扩充指令操作
LCALL SEND_I
MOV A,#30H ;30H--基本指令操作
LCALL SEND_I
MOV A,#01H ;清除显示
LCALL SEND_I
MOV A,#06H ;指定在资料写入或读取时，光标的移动方向
LCALL SEND_I ;DDRAM 的地址计数器(AC)加1
MOV A,#0CH ;开显示,关光标,不闪烁
LCALL SEND_I
;===============================================
TU_PLAY1:
MOV DPTR,#TU_TAB1 ;显示图形
LCALL PHO_DISP
LCALL DELAY3
;=================================================
;;显示汉字和字符
;加入80ms的延时，使你能够看清楚显示的过程
;根据汉字显示坐标分段写入（顺序写入）
;=================================================
HAN_WR2:
LCALL CLEAR_P
HAN_WR2A:
MOV DPTR,#TAB1A ;显示汉字和字符
MOV COUNT,#10H ;地址计数器设为16。
MOV A,#80H ;第一行起始地址
LCALL SEND_I
LCALL QUSHU
HAN_WR2B:
MOV DPTR,#TAB1B ;显示汉字和字符
MOV COUNT,#10H ;地址计数器设为16。
MOV A,#90H ;第二行起始地址
LCALL SEND_I
LCALL QUSHU
HAN_WR2C:
MOV DPTR,#TAB1C ;显示汉字和字符
MOV COUNT,#10H ;地址计数器设为16。
MOV A,#88H ;第三行起始地址
LCALL SEND_I
LCALL QUSHU
HAN_WR2D:
MOV DPTR,#TAB1D ;显示汉字和字符
MOV COUNT,#10H ;地址计数器设为16。
MOV A,#98H ;第四行起始地址
LCALL SEND_I
LCALL QUSHU
LCALL DELAY3
LCALL FLASH
LCALL CLEAR_P
JMP TU_PLAY2
;----------------------------------------------
;TU_PLAY1:
MOV DPTR,#TU_TAB1 ;显示图形
LCALL PHO_DISP
LCALL DELAY3
;----------------------------------------------
TU_PLAY2:
MOV DPTR,#TU_TAB2 ;显示图形
LCALL PHO_DISP
LCALL DELAY3
;----------------------------------------------
TU_PLAY3:
MOV DPTR,#TU_TAB4 ;显示图形
LCALL PHO_DISP
LCALL DELAY3
;-----------------------------------------------
;显示点阵
;-----------------------------------------------
LATPLAY1:
MOV A,#01H ;清屏
LCALL SEND_I
MOV LCD_DATA1,#0CCH ;显示点阵
MOV LCD_DATA2,#0CCH
LCALL LAT_DISP
LCALL DELAY3
LCALL CLEAR_P
KU_PLAY2:
LJMP TU_PLAY1
;===============================================
;全屏显示图形子程序
;===============================================
PHO_DISP:
MOV COUNT3,#02H
MOV LCD_X,#80H
PHO_DISP1:
MOV LCD_Y,#80H
MOV COUNT2,#20H
PHO_DISP2:
MOV COUNT1,#10H
LCALL WR_ZB
PHO_DISP3:
CLR A
MOVC A,@A+DPTR
LCALL SEND_D
INC DPTR
DJNZ COUNT1,PHO_DISP3
INC LCD_Y
DJNZ COUNT2,PHO_DISP2
MOV LCD_X,#88H
DJNZ COUNT3,PHO_DISP1
MOV A,#36H
LCALL SEND_I
MOV A,#30H
LCALL SEND_I
RET
;----------------------------------------------
CLRRAM:
MOV LCD_DATA1,#00H ;GDRAM写0子程序
MOV LCD_DATA2,#00H
LCALL LAT_DISP
RET
;==============================================
;显示点阵子程序
;==============================================
LAT_DISP:
MOV COUNT3,#02H
MOV LCD_X,#80H
LAT_DISP1:
MOV LCD_Y,#80H
CLR F0
MOV COUNT2,#20H
LAT_DISP2:
MOV COUNT1,#10H
LCALL WR_ZB
LAT_DISP3:
JB F0,LAT_DISP32
MOV LCD_DATA,LCD_DATA1
AJMP LAT_DISP31
LAT_DISP32:
MOV LCD_DATA,LCD_DATA2
LAT_DISP31:
MOV A,LCD_DATA
LCALL SEND_D
DJNZ COUNT1,LAT_DISP31
INC LCD_Y
CPL F0
DJNZ COUNT2,LAT_DISP2
MOV LCD_X,#88H
DJNZ COUNT3,LAT_DISP1
MOV A,#36H
LCALL SEND_I
MOV A,#30H
LCALL SEND_I
RET
;---------------------------------------------
WR_ZB:
MOV A,#34H
LCALL SEND_I
MOV A,LCD_Y
LCALL SEND_I
MOV A,LCD_X
LCALL SEND_I
MOV A,#30H
LCALL SEND_I
RET
;===============================================
FLASH:
MOV A,#08H ;关闭显示
LCALL SEND_I
LCALL DELAY5
MOV A,#0CH ;开显示,关光标,不闪烁
LCALL SEND_I
LCALL DELAY5
MOV A,#08H ;关闭显示
LCALL SEND_I
LCALL DELAY5
MOV A,#0CH ;开显示,关光标,不闪烁
LCALL SEND_I
LCALL DELAY5
MOV A,#08H ;关闭显示
LCALL SEND_I
LCALL DELAY5
RET
;==================================================
;清屏
;==================================================
CLEAR_P:
MOV A,#01H ;清屏
LCALL SEND_I
MOV A,#34H
LCALL SEND_I
MOV A,#30H
LCALL SEND_I
RET
;==================================================
;查表取数据送显示
;==================================================
QUSHU:
CLR A
MOVC A,@A+DPTR ;查表取数据
LCALL SEND_D ;送显示
INC DPTR
LCALL DELAY4 ;延时80ms,
DJNZ COUNT,QUSHU
RET
;===============================================
;写数据子程序
;RS=1,RW=0,E=高脉冲,D0-D7=数据
;===============================================
SEND_D:
LCALL CHK_BUSY ;写数据子程序
SETB RS
CLR RW
MOV P0,A
SETB E
NOP
NOP
CLR E
RET
;===============================================
;写指令子程序
;RS=0,RW=0,E=高脉冲,D0-D7=指令码
;===============================================
SEND_I:
LCALL CHK_BUSY
CLR RS
CLR RW
MOV P0,A
SETB E
NOP
NOP
CLR E
RET
;================================================
;读数据子程序
;RS=1,RW=1,E=H,D0-D7=数据
;================================================
READ_D:
LCALL CHK_BUSY ;读数据子程序
SETB RS
SETB RW
SETB E
NOP
MOV A,P0
CLR E
MOV STORE,A
RET
;================================================
;;测忙碌子程序
;RS=0,RW=1,E=H,D0-D7=状态字
;================================================
CHK_BUSY:
MOV P0,#0FFH ;测忙碌子程序
CLR RS
SETB RW
SETB E
JB P0.7,$
CLR E
RET
;================================================
;延时子程序
DELAY3:
MOV R5,#16H
DEL31: MOV R6,#100
DEL32: MOV R7,#0FFH
DEL33: DJNZ R7,DEL33
DJNZ R6,DEL32
DJNZ R5,DEL31
RET
DELAY2:
MOV R6,#0CH
DEL21: MOV R7,#18H
DEL22: DJNZ R7,DEL22
DJNZ R6,DEL21
RET
DELAY1:
MOV R6,#06H
DEL11: MOV R7,#08H
DEL12: DJNZ R7,DEL12
DJNZ R6,DEL11
RET
DELAY4:
MOV R6,#100
DEL41: MOV R7,#200
DEL42: DJNZ R7,DEL42
DJNZ R6,DEL41
RET
DELAY5:
MOV R5,#05H
DEL51: MOV R6,#100
DEL52: MOV R7,#0FFH
DEL53: DJNZ R7,DEL53
DJNZ R6,DEL52
DJNZ R5,DEL51
RET
;***********************************************
TAB1:
TAB1A: DB ' 51测试网 ' ;显示在第一行
TAB1C: DB '自学单片机第一站' ;显示在第三行
TAB1B: DB ' www.8951.COM ' ;显示在第二行
TAB1D: DB 'TEL 755-89956892' ;显示在第四行
;*-------------------------------------------------------------------- *
;* Bitmap点阵数据表 *
;* 图片: E:\图形8.bmp,横向取模左高位,数据排列:从左到右从上到下 *
;* 图片尺寸: 128 * 64 *
;*-------------------------------------------------------------------- *
TU_TAB1: ; 数据表
db 0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 3Ch, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 7Fh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h,0FFh,0C0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 01h,0BFh,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 01h,0FFh,0DCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 01h, 1Fh,0FEh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 01h,0DFh,0FFh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h,0FFh,0FFh, 19h, 8Ch, 03h, 06h, 00h, 18h, 00h,0FFh,0E1h
db 80h, 00h, 00h, 00h, 00h, 3Fh,0FFh, 0Ch,0CCh, 03h, 06h, 00h, 18h, 00h,0FFh,0E1h
db 80h, 00h, 00h, 00h, 00h, 7Fh,0FFh, 04h, 58h, 03h, 06h, 01h,0FFh,0C0h, 00h,0C1h
db 80h, 00h, 00h, 00h, 00h, 7Fh,0DAh, 3Fh,0FEh, 0Fh,0DFh,0C1h,0FFh,0C0h, 01h, 81h
db 80h, 00h, 00h, 00h, 00h, 7Fh, 8Ch, 3Fh,0FEh, 0Fh,0DFh,0C1h, 98h,0C0h, 07h, 01h
db 80h, 00h, 00h, 00h, 00h, 7Fh,0B8h, 30h, 06h, 03h, 06h, 01h, 98h,0C0h, 06h, 01h
db 80h, 00h, 00h, 00h, 00h,0FEh,0C0h, 0Fh,0F8h, 03h, 8Eh, 01h,0FFh,0C3h,0FFh,0F9h
db 80h, 00h, 00h, 00h, 00h, 7Eh, 00h, 0Fh,0F8h, 07h,0CFh, 01h, 98h,0C3h,0FFh,0F9h
db 80h, 00h, 00h, 00h, 00h, 7Fh, 00h, 00h, 60h, 07h, 5Fh, 81h, 98h,0C0h, 06h, 01h
db 80h, 00h, 00h, 00h, 00h, 7Fh, 80h, 3Fh,0FEh, 0Fh, 36h,0C1h,0FFh,0C0h, 06h, 01h
db 80h, 00h, 00h, 00h, 00h, 1Fh, 80h,0BFh,0FEh, 0Bh, 36h, 61h,0FFh,0C0h, 06h, 01h
db 80h, 00h, 00h, 00h, 00h, 1Fh,0C7h, 00h,0C0h, 03h, 66h, 21h, 98h, 30h, 06h, 01h
db 80h, 00h, 00h, 00h, 15h, 5Fh,0C7h, 00h,0C0h, 03h, 06h, 00h, 18h, 30h, 06h, 01h
db 80h, 00h, 02h,0E0h, 06h, 7Fh,0CEh, 03h,0C0h, 03h, 06h, 00h, 1Fh,0F0h, 1Eh, 01h
db 80h, 00h, 04h, 54h, 4Fh,0FFh,0FCh, 01h, 80h, 03h, 06h, 00h, 0Fh,0E0h, 0Ch, 01h
db 80h, 00h, 03h,0FDh, 3Fh,0FFh,0D9h,0C0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 1Dh,0FFh,0FFh,0FFh, 87h, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 2Bh,0FFh,0F8h, 7Fh, 06h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 3Fh,0BFh,0F8h, 09h, 0Fh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 1Fh, 9Fh,0F0h, 00h,0BCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 9Dh,0FEh, 1Fh, 8Fh,0F0h, 00h,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 9Fh,0FCh, 17h, 8Fh,0F0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 81h,0FFh,0CFh, 9Fh,0E0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 82h,0FFh,0FFh, 9Ch, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 81h, 7Fh,0FFh,0FCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 6Fh,0FEh, 30h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 03h,0FCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 34h, 14h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 0Eh, 18h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 02h, 30h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 01h,0E0h, 00h, 00h, 7Fh, 04h, 00h, 3Fh, 82h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 7Fh, 0Ch, 00h, 3Fh, 86h, 00h, 00h, 00h, 00h, 01h
db 80h, 00h, 00h, 00h, 00h, 00h, 7Fh, 1Ch, 00h, 3Fh, 8Eh, 00h, 00h, 00h, 00h, 01h
db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 70h, 7Ch, 38h, 38h, 3Eh, 00h,0E0h, 38h, 3Bh, 31h
db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 70h, 7Ch, 3Ch, 38h, 3Eh, 00h,0F0h, 7Ch, 3Fh,0F9h
db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 76h, 1Ch, 7Eh, 3Bh, 0Eh, 01h,0F8h,0FEh, 3Fh,0F9h
db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 7Fh, 1Ch, 76h, 3Fh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h
db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 7Fh, 1Ch, 76h, 3Fh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h
db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 77h, 1Ch, 76h, 3Bh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h
db 81h,0BBh, 0Dh,0D8h, 6Eh,0C0h, 07h, 1Ch, 70h, 03h, 8Eh, 01h,0C0h,0EEh, 3Bh,0B9h
db 81h,0ABh, 0Dh, 58h, 6Ah,0C0h, 07h, 1Ch, 70h, 03h, 8Eh, 01h,0C0h,0EEh, 3Bh,0B9h
db 81h,0ABh, 0Dh, 58h, 6Ah,0C0h, 77h, 1Ch, 70h, 3Bh, 8Eh, 01h,0C0h,0EEh, 3Bh,0B9h
db 81h,0ABh, 0Dh, 58h, 6Ah,0C0h, 77h, 1Ch, 76h, 3Bh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h
db 81h,0EFh, 0Fh, 78h, 7Bh,0C0h, 77h, 1Ch, 76h, 3Bh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h
db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 77h, 1Ch, 76h, 3Bh, 8Eh, 39h,0D8h,0EEh, 3Bh,0B9h
db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 7Fh, 1Ch, 7Eh, 3Fh, 8Eh, 39h,0F8h,0FEh, 3Bh,0B9h
db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 3Eh, 1Ch, 3Ch, 1Fh, 0Eh, 38h,0F0h, 7Ch, 3Bh,0B9h
db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 1Ch, 1Ch, 3Ch, 0Eh, 0Eh, 38h,0F0h, 78h, 3Bh,0B9h
db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h
db 0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh
;*-------------------------------------------------------------------- *
;* Bitmap点阵数据表 *
;* 图片: E:\图形12.bmp,横向取模左高位,数据排列:从左到右从上到下 *
;* 图片尺寸: 128 * 64 *
;*-------------------------------------------------------------------- *
TU_TAB2: ; 数据表
db 40h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 03h, 65h,0E8h, 80h, 00h, 01h
·········
·········
end
『玖』 如何通过51单片机实现GPS定位功能并将位置信息传到手机上
你好！用GPS + GSM 模块，就能实现，程序可以完成
『拾』 单片机卫星定位编程
想法不错，实际动手前有几个问题最好多考虑一下：温度、湿度、压力、通信距离。
目标区域的温度范围会是多少？一般的电子系统的工作温度是在-10到+40之间，这个是指不需要怎么特别处理就可以稳定工作的温度范围，实际上，低于零下的温度，一般的电池就可能要罢工的。
通信距离，GPS接收应该不存在距离问题，但GPRS通信不好说了，GPRS是终端与地面站之间进行通信，距离太远就要考虑通信不成功的可能性了。
回到问题，GPS、GPRS都有现成的模块可以用，而且都是串口，字符格式的，单片机不需要对数据进行额外处理，读取到缓冲区，格式转化一下，发送就可以了。