燕秀工具箱檢查零件干涉命令

① 裝配體干涉檢查時，怎樣不讓標准件螺栓參與干涉檢查

你應該是沒有選到位 就是你說的其實是有干涉的那個零件與你沒有選到的零件之間的干涉面。你試著多選幾個面來試，還有單獨畫兩個零件然後配合成有干涉，試一下會不會檢查錯誤，如果有的話及你就可能要修復一下你的solidworks了。干涉是一步一步上去的我個人建議每上一個組成部分都檢查一下干涉，確定沒有問題了再進行下一步動作不然最後如果有干涉的話更改過來很花功夫。

② cad干涉檢查怎麼用

筆和筆套插入檢查原理：
筆坐標是x1,x2,筆套是x3,x4,檢查x2
x3有干涉，這是一維干涉檢查。推廣到二維和三維原理一樣，只是數學知識難度加大了一點。
以前我用fortran語言編程解決過繪圖軟體自動布置圖塊的難題，屬二維干涉檢查。

③ 在CAD中安裝了 燕秀工具箱 但用的時候全部都是未知命令。怎麼辦

重新載入一下 ，
個人認為 賤人工具版箱 也不錯權，http://www.xdowns.com/soft/31/221/2012/Soft_96834.html

④ 機械裝配圖（2D，CAD）怎麼檢查零件之間的干涉

三維干涉在檢查多零件加工裝配時所用,如多個零件存在干涉,那自然加工出來的產品就會裝不上去,所以在設計前期,CAD三維軟體可以模擬產品組裝後的實際情況,出現干涉的地方要重新設計,做出避讓位或配合間隙,以使設計出的產品能滿足生產裝配要求.

⑤ Proe4.0版本如何檢查兩個零件的干涉

干涉分兩種，1 體積干涉 2 全局干涉，且都必須在裝配模塊可用，

⑥ 怎樣用solidworks檢查裝配體是否干涉

在電腦上找一個裝配文件，即後綴名帶有ASM或SLDASM。如圖所示下面就是打開後的裝配體。

在電腦左側或上方找到評估這個選項，從裡面可以看到很多命令的有關操作。

在評估這個選項里選擇第二個命令-干涉檢查，如圖點擊干涉檢查後彈出以下對話框。

確認所選零部件，是不是對的。在下面的選項里根據實際情況進行勾選所需要的條件，如勾選顯示忽略的干涉。在非干涉零部件選擇隱藏。

相關條件選好後，點擊計算。軟體開始自動找出這個裝配體有哪些地方是干涉。在結果里可以查看干涉的結果。

根據干涉的結果進行分析，是否在實際中有影響。按順序點擊這個干涉1，系統自動在干涉的地方用粉紅的顏色表示出來。有影響直接修改過來，沒有影響按下面的忽略就可以了。

⑦ PROE組件如何做2個子零件之間的單獨干涉檢查是指定的其中2個零件干涉檢查，而不是所有零件干涉檢查。

使用簡化表示，設置2個需要干涉檢查的零件，再運行干涉檢查.

⑧ catia零件設計里有沒有干涉檢查工具

干涉檢測

⑨ 燕秀工具箱的命令怎麼用不了

傾國青橙為您傾誠解答。

命令: sw
未知命令「SW」。按 F1 查看幫助。
怎麼會這樣啊 老是用不了啊 從裝了CAD
補充：
such Windows system commands, utilities, and applications.
; You define external commands by specifying a command name to be used
; from the AutoCAD command prompt and an executable command string
; that is passed to the operating system.
; -- Command Aliases --
; The Command Aliases section of this file provides default settings for
; AutoCAD command shortcuts. Note: It is not recommended that you directly
; modify this section of the PGP file., as any changes you make to this section of the
; file will not migrate successfully if you upgrade your AutoCAD to a
; newer version. Instead, make changes to the new
; User Defined Command Aliases
; section towards the end of this file.
; -- User Defined Command Aliases --
; You can abbreviate frequently used AutoCAD commands by defining
; aliases for them in the User Defined Command Aliases section of acad.pgp.
; You can create a command alias for any AutoCAD command,
; device driver command, or external command.
; Recommendation: back up this file before editing it. To ensure that
; any changes you make to PGP settings can successfully be migrated
; when you upgrade to the next version of AutoCAD, it is suggested that
; you make any changes to the default settings in the User Defined Command
; Aliases section at the end of this file.
; External command format:
; <Command name>,[<Shell request>],<Bit flag>,[*]<Prompt>,
; The bits of the bit flag have the following meanings:
; Bit 1: if set, don't wait for the application to finish
; Bit 2: if set, run the application minimized
; Bit 4: if set, run the application "hidden"
; Bit 8: if set, put the argument string in quotes
;
; Fill the "bit flag" field with the sum of the desired bits.
; Bits 2 and 4 are mutually exclusive; if both are specified, only
; the 2 bit is used. The most useful values are likely to be 0
; (start the application and wait for it to finish), 1 (start the
; application and don't wait), 3 (minimize and don't wait), and 5
; (hide and don't wait). Values of 2 and 4 should normally be avoided,
; as they make AutoCAD unavailable until the application has completed.
;
; Bit 8 allows commands like DEL to work properly with filenames that
; have spaces such as "long filename.dwg". Note that this will interfere
; with passing space delimited lists of file names to these same commands.
; If you prefer multiplefile support to using long file names, turn off
; the "8" bit in those commands.
; Examples of external commands for command windows
DEL, DEL, 8,要刪除的文件: ,
DIR, DIR, 8,指定文件: ,
SH, , 1,*操作系統命令: ,
SHELL, , 1,*操作系統命令: ,
START, START, 1,*要啟動的應用程序: ,
TYPE, TYPE, 8,要列出的文件: ,
; Examples of external commands for Windows
; See also the (STARTAPP) AutoLISP function for an alternative method.
EXPLORER, START EXPLORER, 1,,
NOTEPAD, START NOTEPAD, 1,*要編輯的文件: ,
PBRUSH, START PBRUSH, 1,,

; Command alias format:
; <Alias>,*<Full command name>
; The following are guidelines for creating new command aliases.
; 1. An alias should rece a command by at least two characters.
; Commands with a control key equivalent, status bar button,
; or function key do not require a command alias.
; Examples: Control N, O, P, and S for New, Open, Print, Save.
; 2. Try the first character of the command, then try the first two,
; then the first three.
; 3. Once an alias is defined, add suffixes for related aliases:
; Examples: R for Redraw, RA for Redrawall, L for Line, LT for
; Linetype.
; 4. Use a hyphen to differentiate between command line and dialog
; box commands.
; Example: B for Block, -B for -Block.
;
; Exceptions to the rules include AA for Area, T for Mtext, X for Explode.
; -- Sample aliases for AutoCAD commands --
; These examples include most frequently used commands. NOTE: It is recommended
; that you not make any changes to this section of the PGP file to ensure the
; proper migration of your customizations when you upgrade to the next version of
; AutoCAD. The aliases listed in this section are repeated in the User Custom
; Settings section at the end of this file, which can safely be edited while
; ensuring your changes will successfully migrate.

3A, *3DARRAY
3DMIRROR, *MIRROR3D
3DNavigate,*3DWALK
3DO, *3DORBIT
3DW, *3DWALK
3F, *3DFACE
3M, *3DMOVE
3P, *3DPOLY
3R, *3DROTATE
A, *ARC
AC, *BACTION
ADC, *ADCENTER
AECTOACAD, *-ExportToAutoCAD
AA, *AREA
AL, *ALIGN
3AL, *3DALIGN
AP, *APPLOAD
AR, *ARRAY
-AR, *-ARRAY
ATT, *ATTDEF
-ATT, *-ATTDEF
ATE, *ATTEDIT
-ATE, *-ATTEDIT
ATTE, *-ATTEDIT
B, *BLOCK
-B, *-BLOCK
BC, *BCLOSE
BE, *BEDIT
BH, *HATCH
BO, *BOUNDARY
-BO, *-BOUNDARY
BR, *BREAK
BS, *BSAVE
BVS, *BVSTATE
C, *CIRCLE
CAM, *CAMERA
CH, *PROPERTIES
-CH, *CHANGE
CHA, *CHAMFER
CHK, *CHECKSTANDARDS
CLI, *COMMANDLINE
COL, *COLOR
COLOUR, *COLOR
CO, *COPY
CP, *COPY
CT, *CTABLESTYLE
CYL, *CYLINDER
D, *DIMSTYLE
DAL, *DIMALIGNED
DAN, *DIMANGULAR
DAR, *DIMARC
JOG, *DIMJOGGED
DBA, *DIMBASELINE
DBC, *DBCONNECT
DC, *ADCENTER
DCE, *DIMCENTER
DCENTER, *ADCENTER
DCO, *DIMCONTINUE
DDA, *DIMDISASSOCIATE
DDI, *DIMDIAMETER
DED, *DIMEDIT
DI, *DIST
DIV, *DIVIDE
DJO, *DIMJOGGED
DLI, *DIMLINEAR
DO, *DONUT
DOR, *DIMORDINATE
DOV, *DIMOVERRIDE
DR, *DRAWORDER
DRA, *DIMRADIUS
DRE, *DIMREASSOCIATE
DRM, *DRAWINGRECOVERY
DS, *DSETTINGS
DST, *DIMSTYLE
DT, *TEXT
DV, *DVIEW
E, *ERASE
ED, *DDEDIT
EL, *ELLIPSE
ER, *EXTERNALREFERENCES
EX, *EXTEND
EXIT, *QUIT
EXP, *EXPORT
EXT, *EXTRUDE
F, *FILLET
FI, *FILTER
FSHOT, *FLATSHOT
G, *GROUP
-G, *-GROUP
GD, *GRADIENT
GEO, *GEOGRAPHICLOCATION
GR, *DDGRIPS
H, *HATCH
-H, *-HATCH
HE, *HATCHEDIT
HI, *HIDE
I, *INSERT
-I, *-INSERT
IAD, *IMAGEADJUST
IAT, *IMAGEATTACH
ICL, *IMAGECLIP
IM, *IMAGE
-IM, *-IMAGE
IMP, *IMPORT
IN, *INTERSECT
INF, *INTERFERE
IO, *INSERTOBJ
J, *JOIN 這個是燕秀裡面的怎麼全是英文啊
根本就沒有燕秀的命令啊
如有幫助，請及時採納，感謝親的支持！

⑩ <燕秀工具箱>警告:您的Autocad已被acad.lsp病毒感染!

殺毒，360里有個CAD病毒專殺，在360工具裡面，用那個殺一遍，再掃一遍木馬，重啟應內該就行了。之後容按上面顯示的，在CAD里直接輸入yx_bdxf，就會出來燕秀工具箱 cad中毒修復，下面有一個acad.lsp病毒免疫，點一下就免疫那個病毒了，不過這種免疫方法只能在沒有感染acad.lsp病毒時使用。所以說還是要先殺一下毒。徹底點的話可以用360都掃描一遍木馬病毒