如何用燕秀工具箱殺毒

⑴ 誰能給我個CAD燕秀工具箱使用教程

燕秀工具箱裡面有使用幫助、就跟ＣＡＤ一樣的，很好用、、、

⑵ 燕秀工具箱是什麼它的作用又是什麼哦，怎麼使用燕秀工具箱需要想想解答，謝謝哦！！

燕秀工具箱是用在AutoCAD軟體上的插件，實現了很多CAD本身不具有的功能，安裝後就集成到CAD的菜單欄里，可以隨時調用。

注意：

燕秀工具箱支持AutoCAD2004、2005、2006、2007、2008、2009、2010、2011、2012支持簡體及繁體Win7_X64系統。免費AutoCAD塑膠模具增強外掛程序。

燕秀工具箱 支持AutoCAD2004、2005、2006、2007、2008、2009、2010、2011、2012支持簡體及繁體64位Win7系統。免費AutoCAD塑膠模具增強外掛程序。注重應用功能的增強，並不只是畫畫標准件而已。

修復的功能: 修復(隱藏對象)個別情況下無法運行問題修復2.8(刪除重復線)誤刪對象問題修復2.8(檢查坐標標注原點個數)顯示問題 修復2.8個別情況下標注全局比例導致標注功能無法使用問題 修復(視圖對齊)會自動關閉極軸問題。

修復(智能標注)開啟右鍵菜單不能右鍵轉換問題 修改(計算列印區域標注文字高度)默認紙張為A4 修復其他的一些小問題。

⑶ 燕秀工具怎麼關閉殺毒功能

沒聽過這個軟體哦，如果不能關閉的話可以用360強力卸載刪除哦

⑷ 燕秀工具箱如何安裝

工具抄/原料

燕秀工具箱 CAD2004

方法/步驟

1、首先下載好安裝包解壓後，打開。

⑸ 請教。cad高手 怎樣把燕秀工具箱和賤人工具箱都能在cad中使用.燕秀工具箱建築裝修使用怎樣

裝兩個版本CAD。。分開倆工具箱

⑹ 如何載入燕秀工具箱

菜單欄不是有嗎？菜單欄沒有的話，就點工具，載入應用程序，把燕秀導進去

⑺ 我裝了燕秀工具後.怎麼每次打開CAD文件都給燕秀工具檢查到有毒呢！

從截圖上看，確實CAD有病毒，有cad的lsp病毒的專殺軟體，可以去下載後進行殺毒，前段時間360是發現不了這個cad病毒的。

⑻ <燕秀工具箱>警告:您的Autocad已被acad.lsp病毒感染!

殺毒，360里有個CAD病毒專殺，在360工具裡面，用那個殺一遍，再掃一遍木馬，重啟應內該就行了。之後容按上面顯示的，在CAD里直接輸入yx_bdxf，就會出來燕秀工具箱 cad中毒修復，下面有一個acad.lsp病毒免疫，點一下就免疫那個病毒了，不過這種免疫方法只能在沒有感染acad.lsp病毒時使用。所以說還是要先殺一下毒。徹底點的話可以用360都掃描一遍木馬病毒

⑼ CAD最近怎麼經常出現「燕秀工具箱」警告啊

清除該病毒的方法：
(1)打開系統的查找「文件或文件夾」對版話框；
(2)在「文件或文件夾名」數權據框中輸入：acad.lsp;acadapp.lsp；
(3)在「包含文字」數據框中輸入：explode；
(4)在「搜索」 數據框中選擇：所有硬碟驅動器；
(5)將搜索到的這兩個文件全部刪除後，問題就已經解決了。
注意：一定要將硬碟是的所有目錄都搜索一遍，這樣才能將病毒清除干凈。
那病毒文件的名字也可能叫Support \ acadiso.lsp

⑽ 燕秀工具箱的命令怎麼用不了

傾國青橙為您傾誠解答。

命令: sw
未知命令「SW」。按 F1 查看幫助。
怎麼會這樣啊 老是用不了啊 從裝了CAD
補充：
such Windows system commands, utilities, and applications.
; You define external commands by specifying a command name to be used
; from the AutoCAD command prompt and an executable command string
; that is passed to the operating system.
; -- Command Aliases --
; The Command Aliases section of this file provides default settings for
; AutoCAD command shortcuts. Note: It is not recommended that you directly
; modify this section of the PGP file., as any changes you make to this section of the
; file will not migrate successfully if you upgrade your AutoCAD to a
; newer version. Instead, make changes to the new
; User Defined Command Aliases
; section towards the end of this file.
; -- User Defined Command Aliases --
; You can abbreviate frequently used AutoCAD commands by defining
; aliases for them in the User Defined Command Aliases section of acad.pgp.
; You can create a command alias for any AutoCAD command,
; device driver command, or external command.
; Recommendation: back up this file before editing it. To ensure that
; any changes you make to PGP settings can successfully be migrated
; when you upgrade to the next version of AutoCAD, it is suggested that
; you make any changes to the default settings in the User Defined Command
; Aliases section at the end of this file.
; External command format:
; <Command name>,[<Shell request>],<Bit flag>,[*]<Prompt>,
; The bits of the bit flag have the following meanings:
; Bit 1: if set, don't wait for the application to finish
; Bit 2: if set, run the application minimized
; Bit 4: if set, run the application "hidden"
; Bit 8: if set, put the argument string in quotes
;
; Fill the "bit flag" field with the sum of the desired bits.
; Bits 2 and 4 are mutually exclusive; if both are specified, only
; the 2 bit is used. The most useful values are likely to be 0
; (start the application and wait for it to finish), 1 (start the
; application and don't wait), 3 (minimize and don't wait), and 5
; (hide and don't wait). Values of 2 and 4 should normally be avoided,
; as they make AutoCAD unavailable until the application has completed.
;
; Bit 8 allows commands like DEL to work properly with filenames that
; have spaces such as "long filename.dwg". Note that this will interfere
; with passing space delimited lists of file names to these same commands.
; If you prefer multiplefile support to using long file names, turn off
; the "8" bit in those commands.
; Examples of external commands for command windows
DEL, DEL, 8,要刪除的文件: ,
DIR, DIR, 8,指定文件: ,
SH, , 1,*操作系統命令: ,
SHELL, , 1,*操作系統命令: ,
START, START, 1,*要啟動的應用程序: ,
TYPE, TYPE, 8,要列出的文件: ,
; Examples of external commands for Windows
; See also the (STARTAPP) AutoLISP function for an alternative method.
EXPLORER, START EXPLORER, 1,,
NOTEPAD, START NOTEPAD, 1,*要編輯的文件: ,
PBRUSH, START PBRUSH, 1,,

; Command alias format:
; <Alias>,*<Full command name>
; The following are guidelines for creating new command aliases.
; 1. An alias should rece a command by at least two characters.
; Commands with a control key equivalent, status bar button,
; or function key do not require a command alias.
; Examples: Control N, O, P, and S for New, Open, Print, Save.
; 2. Try the first character of the command, then try the first two,
; then the first three.
; 3. Once an alias is defined, add suffixes for related aliases:
; Examples: R for Redraw, RA for Redrawall, L for Line, LT for
; Linetype.
; 4. Use a hyphen to differentiate between command line and dialog
; box commands.
; Example: B for Block, -B for -Block.
;
; Exceptions to the rules include AA for Area, T for Mtext, X for Explode.
; -- Sample aliases for AutoCAD commands --
; These examples include most frequently used commands. NOTE: It is recommended
; that you not make any changes to this section of the PGP file to ensure the
; proper migration of your customizations when you upgrade to the next version of
; AutoCAD. The aliases listed in this section are repeated in the User Custom
; Settings section at the end of this file, which can safely be edited while
; ensuring your changes will successfully migrate.

3A, *3DARRAY
3DMIRROR, *MIRROR3D
3DNavigate,*3DWALK
3DO, *3DORBIT
3DW, *3DWALK
3F, *3DFACE
3M, *3DMOVE
3P, *3DPOLY
3R, *3DROTATE
A, *ARC
AC, *BACTION
ADC, *ADCENTER
AECTOACAD, *-ExportToAutoCAD
AA, *AREA
AL, *ALIGN
3AL, *3DALIGN
AP, *APPLOAD
AR, *ARRAY
-AR, *-ARRAY
ATT, *ATTDEF
-ATT, *-ATTDEF
ATE, *ATTEDIT
-ATE, *-ATTEDIT
ATTE, *-ATTEDIT
B, *BLOCK
-B, *-BLOCK
BC, *BCLOSE
BE, *BEDIT
BH, *HATCH
BO, *BOUNDARY
-BO, *-BOUNDARY
BR, *BREAK
BS, *BSAVE
BVS, *BVSTATE
C, *CIRCLE
CAM, *CAMERA
CH, *PROPERTIES
-CH, *CHANGE
CHA, *CHAMFER
CHK, *CHECKSTANDARDS
CLI, *COMMANDLINE
COL, *COLOR
COLOUR, *COLOR
CO, *COPY
CP, *COPY
CT, *CTABLESTYLE
CYL, *CYLINDER
D, *DIMSTYLE
DAL, *DIMALIGNED
DAN, *DIMANGULAR
DAR, *DIMARC
JOG, *DIMJOGGED
DBA, *DIMBASELINE
DBC, *DBCONNECT
DC, *ADCENTER
DCE, *DIMCENTER
DCENTER, *ADCENTER
DCO, *DIMCONTINUE
DDA, *DIMDISASSOCIATE
DDI, *DIMDIAMETER
DED, *DIMEDIT
DI, *DIST
DIV, *DIVIDE
DJO, *DIMJOGGED
DLI, *DIMLINEAR
DO, *DONUT
DOR, *DIMORDINATE
DOV, *DIMOVERRIDE
DR, *DRAWORDER
DRA, *DIMRADIUS
DRE, *DIMREASSOCIATE
DRM, *DRAWINGRECOVERY
DS, *DSETTINGS
DST, *DIMSTYLE
DT, *TEXT
DV, *DVIEW
E, *ERASE
ED, *DDEDIT
EL, *ELLIPSE
ER, *EXTERNALREFERENCES
EX, *EXTEND
EXIT, *QUIT
EXP, *EXPORT
EXT, *EXTRUDE
F, *FILLET
FI, *FILTER
FSHOT, *FLATSHOT
G, *GROUP
-G, *-GROUP
GD, *GRADIENT
GEO, *GEOGRAPHICLOCATION
GR, *DDGRIPS
H, *HATCH
-H, *-HATCH
HE, *HATCHEDIT
HI, *HIDE
I, *INSERT
-I, *-INSERT
IAD, *IMAGEADJUST
IAT, *IMAGEATTACH
ICL, *IMAGECLIP
IM, *IMAGE
-IM, *-IMAGE
IMP, *IMPORT
IN, *INTERSECT
INF, *INTERFERE
IO, *INSERTOBJ
J, *JOIN 這個是燕秀裡面的怎麼全是英文啊
根本就沒有燕秀的命令啊
如有幫助，請及時採納，感謝親的支持！