導航:首頁 > 器材知識 > 進口設備如何辦理商檢

進口設備如何辦理商檢

發布時間:2021-02-19 15:14:56

① 進口設備哪些需要商檢

根據《中華人民共和國進出口商品檢驗法》規定,將進口商品分為法定檢驗商品(俗稱「法檢貨物」)和非法定檢驗商品(俗稱「非法檢貨物」)兩類。
1、法定檢驗商品:
是指國家以立法形式,通過強制手段,對重要的進出口商品指定由商檢機構統一執行強制性檢驗。凡列入《出入境檢驗檢疫機構實施檢驗檢疫的進出境商品目錄》中的商品均為法檢商品。此類進口商品到貨後需由商檢機構指定人員、商品使用方和銷售方均在場情況下方可開箱,在商檢機構指定人員監督下,由使用方和銷售方對貨物外觀、型號和數量與所簽訂的合同進行核對,並授權使用方對進口商品的指標進行驗收。
若通過驗收,使用方以書面報告上報商檢機構,由商檢機構出具「商檢證」;若進口商品出現外觀損壞、數量或配件缺少、型號不符和性能指標不合要求等狀況,使用方必須出具書面報告上報商檢機構,商檢局出具相應的「商檢證」,使用方憑「商檢證」進行索賠、更換、返廠維修或退運。

2、非法定檢驗商品:
是指未列入《出入境檢驗檢疫機構實施檢驗檢疫的進出境商品目錄》中的進口商品,商檢機構對此類進口商品在港口清關時,以抽檢形式進行監督和管理,抽檢率一般不低於60%。被抽檢到的進口商品由港口商檢機構監督,並授權使用方自行開箱驗收。若驗收通過,可由使用方書面報告港口商檢機構出具「商檢證」;若驗收出現問題,也要書面上報港口商檢機構,由該機構出具相應的「商檢證」,使用方憑「商檢證」進行索賠、更換、返廠維修或退運。
非法檢進口商品如未被港口商檢機構抽檢,港口商檢機構不出具「商檢證」,由外貿公司—西安沃蘭科技有限責任公司為該進口商品出具未被抽檢的說明。
對於法檢和非法檢的進口商品,商檢機構要求出具「商檢證」的時間必須是:自進口貨物報關後的90天內向商檢局提交書面的驗收報告,根據驗收報告出具商檢證。

② 如何辦理進口商品檢驗(請中英文對照回答)

進口商品分法定檢驗商品和非法定檢驗商品,法定檢驗進口商品是列入《種類表》及其他法律、法規規定必須經過商檢機構或者國家商檢局、商檢機構指定的檢驗機構檢驗的進口商品。除此以外的進口商品為非法定檢驗商品。
這兩類商品在辦理報驗手續上有所不同,前看到貨後,收貨人或其代理人必須向口岸或到達站商檢機構辦理進口商品登記手續,然後按商檢機構規定的地點和期限向到貨地商儉機構辦理進口商品報驗。
非法定檢驗進口商品到貨後,由收、用貨部門直接辦理進口通關手續。提貨後,可按合同的約定自行檢驗,若發現問題需憑商檢證書索賠的,應向所在地商檢機構辦理進口商品報驗。

(一)法定檢驗進口商品登記
1.填寫《種類表》內進口商品登記申請表,按下列要求逐項填寫;NO.:商檢受理報驗編號,由受理報驗人員填寫。
申請登記單位:填寫申請登記單位全稱並蓋章。
登記日期:填寫申請登記當天日期。
商品編號:填寫H.S編碼8上數字。
數(重)量:按實際到貨數(重)量填寫,並加附計量單位。
進口日期:按「進口貨物到貨通知單」所列進口日期填寫。
合同號:買賣雙方簽訂的外貿合同的號碼。
合同金額:合同中所列商品總價值,並加附貨物名稱。
貿易國別(或地區):進口商品的出口國家(或地區)貿易方式:指「一般貿易」、「三來一補」、「邊境貿易「或「其他」填寫其中方式之一。
收用貨單位:填寫收用貨單位全稱。
2.應提供的單據:一般應提供進口貨物到貨通知單、進口貨物報關單、合同、發票、提單/運單等。
3.商檢機構經審核、登記後,在報關單上加蓋「已接受登記」印章。海關憑蓋有商檢機構「已接受登記」印章的報關單驗放貨物。經驗放的貨物收用貨部門應按有關規定及時向商檢機構辦理進口商品報驗。

(二)進口商品的報驗
1.填寫進口商品檢驗申請單按下列要求填寫申請單上的相應欄目,未作說明的按實際情況填寫或打對號。
報驗號:商檢機構受理報驗的編號,由受理報驗人員填寫。
報驗單位蓋章:填寫報驗單位全稱,並加蓋公章或報驗專用章。
報驗日期:填寫報驗當天的日期。
發貨人:合同中的賣方。
受貨人:合同中的買方。
品名規格:按合同、發票所列品名規格填寫,如品名太多時,只填寫主要品名即可。
合同號:買賣雙方簽訂的合同編號。
發票號:所附國外發票編號。
H.S編碼:填寫《商品分類及編碼協調制度》中所列該商品的8位編碼。
報驗數量:填寫申請檢驗的數量,並註明計量單位名稱。
報驗重量:填寫申請檢驗的重量,並註明凈重/毛重及商品計重單位名稱。
商品總價值:按合同或國外發票列明的貨值填寫,並註明貨幣名稱。
運輸:填寫運輸工具及運輸方式(海運、空運、陸運等)。如該批貨物是海運、經轉運港運載的,應將船名、裝運港、轉運港、卸貨港及目的港均填寫清楚。
進口日期:填寫進口貨物到貨通知單所列進口日期。
卸貨日期:指完成卸貨的日期。
到廠日期:貨物運至使用單位的日期。
索賠有效期:按合同規定的索賠期填寫。
(索賠有效期有計算方法:是從合同規定的起始日即進口日期或卸畢日期(不含當天)起開始計算,到規定期限的最後一天止。如果截止日為國家法定假日時,則應順延。例如,索賠期為3個月,進口日期為8月3日,索賠有效期就到11月3日止;如果索賠有效期為90天,索賠有效期就到11月1日止,因在此期間,有的月份為31天,計算時應注意。
質保期:即質量保證期,按合同規定日期填寫。
包裝情況:填寫運輸包裝種類及包裝情況是否完好。如有異狀,應按實際情況填寫。
標記及號碼:按實際到貨運輸包裝上所列標記(嘜頭)填寫,如無標記則應填寫「N/M」。
申請說明:申請人如有特殊要求應在此欄中加以說明。
2.進口報驗應提供的單據及資料
報驗項目不同,應提供的單據及資料也各異,具體情況介紹如下:(1)品質、規格報驗應提供下列單據:a.貿易雙方簽訂的合同b.國外發票c.提單或空運單等d.裝箱單e.進口貨物到貨通知單f.國外品質證明g.使用說明書及有關標准與技術資料(2)殘損鑒定報驗,除提供(1)中的a、b、c、d、e外,如海運貨物還應加附理貨公司出具的理貨殘損單、海事報告、大副簽證或保函;如鐵路運輸的貨物應加附鐵路部門出具的商務記錄;如航空運輸貨物應加附空運部門出具的空運事故記錄。
(3)數量、重量鑒定報驗除提供(1)中的a、b、c、d、e外,還應加附重量明細單或磅碼單和理貨清單。進口商品經收、用貨部門驗收或其他部門檢驗的,應加附有關貨物的驗收記錄、重量明細單或檢驗結果報告單。

(三)進口商品報驗的時間及地點
1.報驗時間的規定:
(1)報驗人應在合同中列明的索賠有效期前不少於1/3的時間,向貨物所在地商檢機構報驗。
(2)索賠期已近,來不及完成檢驗出證的,報驗人必須預先向國外辦理延長索賠期手續。
2.報驗地點的規定:
(1)外貿合同或運輸契約規定進口商品檢驗地點的,應在規定的地點所在地商檢機構報驗。如,合同規定憑卸貨口岸商檢機構出具的品質、重量檢驗證書作為計算價格、結算貸款的,就應向卸貨口岸商檢機構報驗;(2)大宗散裝商品、易腐變質商品,如糧食、原糖、化肥、化工原料、農產品等進口商品,必須向卸貨口岸或到達站商檢機構報驗;(3)在卸貨時,發現貨物的外包裝殘損或短件的,必須向卸貨口岸或到達站商檢機構報驗;(4)由內地收貨、用貨的,貨物在國內運輸途中又不會發生變質、變數而包裝又完好的進口商品可向到貨地商檢機構報驗;(5)需結合安裝調試進行檢驗的成套設備、機電儀產品及在口岸開件檢驗難以恢復包裝的商品,應向到貨地商檢機構報驗。

(四)進口商品報驗應注意事項
1.同一合同、同一發票、同一提單限填一份申請單,同一合同、不同發票或提單的,應分別填寫申請單。
2.對裝船前已經過預檢驗、監造監制的進口法檢商品到達口岸時,仍應按規定進行報驗。以貨到後商檢機構的檢驗結果為最終結果,並對檢驗不合格的進口商品簽發檢驗證書,按合同規定對外索賠。
3.對列入《實施安全質量許可制度的進口商品目錄》內的進口商品按法定檢驗商品辦理報驗,並加附進口質量許可證復件或提供許可證編號。
4.報驗人應按合同、發票、提單等項填寫申請單,書寫工整、清晰、准確,不得隨意塗改。
Statutory inspection of imported goods at non-inspection of goods and commodities, statutory inspection of imported commodities are included in the "type table" and other laws and regulations must go through commodity inspection agencies or national Shangjian Ju, commodity inspection organizations designated inspection agency inspection of imported goods. In addition, the import of goods non-statutory inspection of goods.
In handling these two types of goods on post-mortem proceres are different, the former see the goods, the consignee or his agent must be to arrive at stations or commodity inspection authority for the registration of imported goods, by commodity inspection agencies and provides the location and ration And to arrive to thrift institutions for post-mortem on imported goods.
Non-arrival inspection of imported goods, by the close, with imports of goods directly for customs proceres. After the delivery, according to the agreed terms of the contract inspection, commodity inspection found problems Xuping certificate claims, commodity inspection agencies to the location of imported goods at post-mortem.

(A) the statutory inspection of imported goods registered
1. Fill out the "type table" of imported goods registered the application form, filled out one by one according to the following requirements; NO. : A post-mortem was handled No. commodity inspection, was accepted by the staff filled out a post-mortem.
Application for registration: fill out the registration units for the full name and sealed.
The date of registration: fill out an application on the registration date.
Proct Number: H.S filled out on the digital encoding 8.
(Weight) of: the actual arrival of (weight) of complete and attach a measurement units.
Imports: according to "imported goods arrive notice" fill in the date of import.
Contract number: buyers and sellers of foreign trade contracts signed between the numbers.
The contract amount: Contract included in the total value of goods and attach a name goods.
Trade country (or region): exports of goods imported from countries (or regions) trade: refers to "general trade" and "three to a meeting" and "border trade" or "other" fill in one way.
To use cargo: cargo unit used to fill in the full name.
2. Should provide the documentation: General shall provide notice of arrival of imported goods, imports of goods declarations, contracts, invoices, bills of lading / AWB, and so on.
3. Commodity inspection agencies audited, after registration, in declarations on with the "have accepted the registration of" chop. Customs covered with a commodity inspection agencies "have accepted the registration of" seal the declarations Yanfang goods. Experience with release of the goods or goods sector should be a timely manner to the relevant provisions of commodity inspection agencies for inspection of imported goods reported.

(B) of imported goods at the post-mortem
1. Filled out a single application for inspection of imported goods according to the following requirements to fill in the application of the corresponding single-section and no description of the actual situation or fill out a checkmark.
A post-mortem, reported: admissibility commodity inspection agencies reported the number of post-mortem, was accepted by the staff filled out a post-mortem.
Baoyandanwei seal: Baoyandanwei filled out the full name and with official seals or at post-mortem Zhuanyong Zhang.
A post-mortem report: completing post-mortem on the date of the day.
Shipper: the contract of the seller.
The goods: the buyer in the contract.
Name Specifications: according to the contract, invoices in the Name fill specifications, such as too many names, the only major names to fill out.
Of the contract: the seller and the buyer signed the contract numbers.
Invoice number: foreign invoice number attached.
HS Code: fill out the "commodity classification and coding system of coordination" in the commodities listed in the 8-bit code.
A post-mortem report: the number of tests to fill in the application, and indicate measurement units name.
A post-mortem on the weight: to fill in the application of the test weight, and indicate NW / GW and commodities unit weight title.
The total value of goods: according to the contract or specify the value of foreign invoices filled out, and indicate the currency name.
Transport: Fill in transport equipment and mode of transport (sea, air and land transportation, etc.). If the goods by sea, carried by the transfer of Hong Kong should be vessel name, port of shipment, transshipment port, the port and the port of destination are filled out clearly.
Imports: fill in imports of goods listed in the notice of arrival date of import.
Discharge date: that the completion date of discharge.
Works to date: the use of units of goods shipped to date.
The claim is valid: According to the terms of the contract filled out the claim period.
(Valid claims have calculated as follows: from the start of the contract is completed the unloading of imports of date or date (not including the day) started, to the last day of the deadline ended. If the statutory deadline for national holidays, it should be Postponed, for example, the claim period of three months, the import date for August 3, the claim is valid on November 3 to only if the claim is valid for 90 days on the validity of claims to November 1 only, because ring this period, Some of the month for 31 days, calculated to be noted.
Warranty period: the quality of the guarantee period, the date set for completing the contract.
Packaging: fill out the type of packaging and packaging situation is good. For Yizhuang, should fill out the actual situation.
Markings and numbers: the actual arrival listed on the packaging tag (Mark head) fill out, without the tags should be filled out "N / M".
Applications: If the applicant has special requirements in this column should be clearly stated.
2. Import post-mortem report should provide documentation and information
A post-mortem on different projects, should provide documentation and information is also different, specific information is as follows: (1) quality, specifications post-mortem report should provide the following documents: a. trade contracts signed between the foreign invoices b. c. bill of lading or an air waybill D. packing lists and other imported goods arrive e. f. notice that the quality of foreign g. Manual of Standards and Technology and related information (2) identification of defective post-mortem report, in addition to (1) in a, b, c, d, e, such as the seaborne cargo should also attach a cargo handling company-issued by the cargo handling defective, the Marine report, the University Pro-Vice-visa or guarantees, such as rail transport of goods by railway authorities should be issued by the business records; such as air transport Cargo air transport sector should attach a certificate from the air accident record.
(3) count, weight addition to providing post-mortem report identified (1) in a, b, c, d, e, should also increase the weight Details of single-or code-pound list and cargo handling. The resumption of imports of goods, with cargo inspection departments or other departments of the test, should increase the acceptance of the goods record, weight Details single report or test results alone.

(C) the inspection of imported goods at the time and the place
1. A post-mortem at the time:
(1) A post-mortem report should be specified in the contract is valid claims before not less than 1 / 3 of the time, to the cargo inspection at the seat of commodity inspection agencies.
(2) the claim period almost, there was no time to permit the completion of inspection, testing must be reported in advance to extend the claim period abroad for proceres.
2. A post-mortem on the site provides:
(1) the transport of foreign trade contracts or contract provisions of imported goods inspection sites, should be in place under the seat of commodity inspection agencies at post-mortem. For example, under the contract with ports of discharge issued by the quality of commodity inspection agencies, as the calculation of the weight of inspection certificate prices, settlement of loans, to the discharge port commodity inspection agencies reported post-mortem; (2) the bulk of bulk commodities, perishable goods such as food, the original Sugar, fertilizers, chemicals, agricultural procts and other imported goods required to reach the point of discharge ports or commodity inspection agencies at post-mortem (3) in the discharge, they found the goods packaging defective or short pieces, and must be to reach the point of discharge ports or commodity inspection A post-mortem agency reported, (4) receiving from the mainland, with the shipment of goods ring transport in the country will not happen again degenerate, variables and the packaging is intact to the arrival of imports of goods and commodity inspection agencies at post-mortem (5) to be combined Commissioning of the test installation of complete sets of equipment, machinery and electrical procts and in-port opened to resume testing of packaged goods, commodity inspection agencies should be to arrive at post-mortem.

(D) A post-mortem on imported goods should pay attention to matters
1. The same contract, the same invoices, bills of lading the same limit for a single-filled, the same contract, different invoices or bills of lading, respectively, to fill in the application alone.
2. After the pre-shipment inspection, supervision of the executive procer of imports of goods seized at border control points, still should be carried out post-mortem report. After the goods to the commodity inspection agencies for the final results of the test results and inspection of imported goods failed inspection certificate issued by foreign claims under the contract.
3. On the "implementation of safety and quality licensing system directory of the imported goods" within the statutory inspection of imported goods by post-mortem report for goods and increase the quality of import permits or provide a permit code.
4. A post-mortem on who should be the contract, invoices, bills of lading fill out an application alone, writing Gong Zheng, clear, accurate and not free to alter.

③ 進口設備商檢需要什麼資料

進口商檢程序報驗時應隨附下列單據或證件:
(a)對外貿易成內交合同(容副本);
(b)國外商業發票;
(c)裝箱清單;
(d)提單;
(e)進口貨物通知書。http://www.iexportcn.com/TradeNews/ViewTradeInfo.aspx?InfoId=14405

④ 進口商品如何做商檢

商檢,正確意思是商品檢驗的簡寫,是出入境檢驗檢疫局工作內容的一部分。但平時業內人士對所有進出口貨物檢驗檢疫都會稱呼其為商檢,其實此處商檢的含義應為:動植檢疫,商品檢驗,衛生檢疫即三檢。
任何進出口境貨物都必須做商檢,但是並不一定是法檢,這點很重要,也是很多人混淆商檢,法檢的概念的原因。只有滿足以下條件的貨物才需要做法檢(法定檢驗)。
1、目錄內規定要求做法檢的貨物
2、美,日,韓及歐盟的貨物
3、特定減免稅證明的貨物
4、其他需要法檢的貨物
註:僅列出常用到的幾種。
商檢的流程:進口商檢施行「先放行通關,後檢驗檢疫」原則。
首先判定是否是法檢(法定檢驗)的貨物。(即看報關單是否有A)
若不是,報關的時候不需要出入境通關單。就是說該貨不是法檢(法定檢驗)貨物。
倘若是,那麼需要先提供資料到商檢局去做商檢,商檢人員對所提供的書面材料進行審核,根據書面資料對貨物描述,來判定是否需要對貨物進行場地查驗。場地查驗的項目通常為動植檢疫,商品檢驗,衛生檢疫等,就是所謂的三檢(也有人叫動衛檢)。並出具入境通關單,憑此通關單向海關報關。
如果商檢人員對貨物開出「場地商檢」的話,那麼在海關放行之後,還需要將貨物托運到商檢局指定的場地做場地商檢,即三檢(動衛檢)之後貨物才被允許運到目的地。
出口商檢,與進口商檢同小異,看報關單的監管條件是否有B。

用戶名是我號碼

⑤ 如何辦理商檢證

進出口商品經過商檢機構進行檢驗或鑒定後,由該檢驗機構出具的書面證明稱為「商品檢驗證書」。以出口貨物為例,獲得商檢證書的流程如下:

1、商檢機構受理報驗。

首先由報驗人填寫「出口檢驗申請書」,並提供有關的單證和資料,如外貿合同、信用證、廠檢結果單正本等;商檢機構在審查上述單證符合要求後,受理該批商品的報驗。

2、抽樣。

由商檢機構派員主持進行,根據不同的貨物形態,採取隨機取樣方式抽取樣品。。

3、檢驗。

檢驗部門可以使用從感官到化學分析、儀器分析等各種技術手段,對出口商品進行檢驗,檢驗的形式有商檢自驗、共同檢驗、駐廠檢驗和產地檢驗。

4、簽發證書。

商檢機構對檢驗合格的商品簽發檢驗證書,或在「出口貨物報關單」上加蓋放行章。出口企業在取得檢驗證書或放行通知單後,在規定的有效期內報運出口。

擴展資料

需要商檢的貨物可以分為幾類:

1、客戶需要商檢的。

客戶為保證自己收到的貨和合同訂立的一致,會要求你辦理商檢並出具商檢單。

2、中國需要法檢貨物。

出口貨物有些國家規定必須在出口前作商檢。

3、進口國需要法檢的貨物。

進口國可能對某些中國出口的貨物規定必須檢驗。檢驗可能可以在中國進行,也可能要在進口地進行。

⑥ 進口商品如何商檢辦理退運手續

一、關於出口退運貨物辦理進口手續問題 1、若屬已收匯、已核銷的情況,由出口商向外匯局面申請並填制「出口核銷退運情況申請表」,經外匯「收匯核銷證明」章後,由原發貨人或者代理人向海辦理出口退運貨物進口報關。海關憑外匯局出具的「出口收匯核銷退運情況申請表」(見附件一)辦理相應手續,並向出口商出具蓋有海關驗訖章的退運貨物進口報關單。出口商憑外匯局出具的「已沖減出口收匯核銷證明」,到外匯指定銀行辦理付匯手續,並作相應的對外付匯國際收支申報(填寫「非貿易(合資本)對外付款申報單」,並註明該筆支出款對應的原涉外收入款款項的申報號碼,交易編碼為「0204」,交易附言欄內註明「退貨」字樣)。九對外匯局未出具「已沖減出口收匯核銷證明」的出口退匯業務,各外匯指銀行一律不得辦理。 2、若屬在出口收匯期間發生貨物全部退運進境的,則由出口商憑原出口報關單(收匯聯)、出口收匯核銷單向海關辦理出口退運貨物進口申報手續。原出口報關單收匯聯由海關留存,並注銷相對應的出口收匯核銷單(在出口收匯核銷單上加差海關「單證專用章」),同時簽發進口報關單(備注欄內註明原出口報關單編號)。出口商憑海關簽發的進口報關單、原出口報關單復印件及由海關注銷的原出口收匯核銷單向外匯局辦理注銷原出口收匯核銷單中退運金額手續。 3、若屬部分退運出口貨物,出口商憑原出口報關向海關辦理進口申報手續,海關在出口報關單上批註實退運數量、金額後退回出口商並,同時簽發一出口返運貨物進口報關單(備注攔上註明原出口報關單號),出口商憑海關簽發的進口報關單、原出口報關單及出口收匯核銷單向外匯局注銷原該出口貨物相應的出口核銷單下應收匯金額。 二、關於進口貨物辦理出口退運問題進口貨物辦理出口退運時,退運人及其代理人應持海關簽發的原進口貨物報關單或外匯局簽發的備案登記表向海關辦理出口退運手續。 1、對己付匯進口貨物退運必須先由進口商向外匯局提出申請,辦理備案登記,海關憑外匯局出具的「進口退運付匯核銷備案登記表」(見附件二)辦理出口退運手續,簽發進口貨物退運的出口報關單(在備注欄上註明原進口報關單編號)。原進口商在收到外商退回的原進口款項時,應填寫「涉外收入申報單」。(對公單位)還需註明對應的原對外付款申報號碼,交易編碼為「0208」,交易附言欄內註明退款,並持海關簽發的相應進口貨物退運的出口報關單、銀行收帳通知或結匯水單、外匯局簽發的「進口退運付匯核銷備案登記表」、貨物進口合同、運輸單據等4並向外匯局辦理進口貨物退貨退匯處理的手續,但收匯銀行不得出具出口收匯核銷專用聯。 2、進口商在辦理末付匯的進口貨物退運時,海關按以下辦法處理: A、對進口貨物全部退運的,海關憑原進口貨物報關單辦理出口退運手續,留存原進口貨物報關單,並簽發出口退運貨物報關單(備注欄註明原進口報關單號)。 B、對進口貨物中部分退運的,海關憑原進口貨物報關單辦理出口手續,在原進口報關單上批註實際遲運的數量、金額後退回申報人,留存復印件。同時簽發一份出口報關單(備注欄上註明原進口報關單號)。原進口商憑海關批註的原進口報關單和簽發的出口報關單辦理付匯核銷手續。 三、進出口商應將有關進出口退運貨物的報關單復印件與有關進出口收付匯核銷單證一並保留五年備查。 四、在辦理進口貨物的退運手續時,原進口商及發貨人應提供海關或外匯局要求的其他證明文件。 五、進出口商在辦理進出口貨物遲運手續時,如發生漏報、瞞報、偽報貨物退運情況,構成逃匯、套匯、騙匯行為的,將根據《中華人民共和國海關法》、《中華人民共和國行政處罰法》、《中華人民共和國外匯管理條例》及其相關法規對其進行處罰。 *貨運方面:一、出口貨物退運辦理進口運輸及報關所需費用:1.報關費2.代理費3.代作檢4.海運費5.港口費,港雜費,換單費,堆存費根據國外客戶提供船名航次提單號件重尺與船艾及倉庫確認費用。6.商檢費根據8位商品編碼,件重尺與商檢局確認費用。 二、所需單據:退運說明,退運協議(雙方簽章),換單保函,箱單,發票,合同。(以上從貨代那裡拿到的資料) *國稅局稅務局出具證明 1、已辦理退稅的貨物:持主管退稅機關出具的《出口商品退運補稅聯系單》向主管征稅機關辦理已退稅款的補繳手續。補繳後持蓋有主觀征稅機關及國庫章的稅收繳款書、出口銷售發票、進口提單等憑證向主管征稅機關申請辦理《出口商品退稅已補稅證明》。已補稅的退運貨物經加工修理又重新出口的,持出口貨物報關單、出口收匯核銷單、出口銷售發票和《出口商品退稅已補稅證明》、稅收繳款書原件重新辦理退稅申報。 2、已申報未退稅貨物。貨物發生退貨而轉為內銷或部分內銷的,向主管退稅機關申請辦理《出口商品退稅已補稅證明》。其應退稅款不在退稅。

⑦ 進口產品商檢的流程如何辦理

進口貨物商檢首先你要知道你貨物到達的口岸是在哪裡?要在達到專口岸的商檢局辦理商檢,進屬口的發票箱單,貨物的詳細資料,當然不知道你們是否有申報進口貨物商檢的系統,如果沒有你就要找代理給你錄入-入境貨物報檢單.還有一份給商檢局的說明資料,不同的貨物有不同的資料准備要求。如果你們是交由貨代報關的話,那麼也就是給貨代代理報檢,你只需要提供報檢委託書即可!而清關資料就需要准備很多了,進口的發票、箱單、詳細的裝箱單以及給海關的說明、報關委託書、銷售合同等!

⑧ 產品出口商檢流程是怎樣的

關於出口商品的檢驗,其程序如下:商檢機構受理報驗,首先由報驗人填寫「出口檢驗申請書」,並提供有關的單證和資料,如外貿合同、信用證、廠檢結果單正本等,商檢機構在審查上述單證符合要求後,受理該批商品的報驗;如發現有不合要求者,可要求申請人補充或修改有關條款。

抽樣:由商檢機構派員主持進行,根據不同的貨物形態,採取隨機取樣方式抽取樣品。報驗人應提供存貨地點情況,並配合商檢人員做好抽樣工作。

檢驗:檢驗部門可以使用從感宮到化學分析、儀器分析等各種技術手段,對出口商品進行檢驗,檢驗的形式有商檢自驗、共同檢驗、駐廠檢驗和產地檢驗。

簽發證書:商檢機構對檢驗合格的商品簽發檢驗證書,或在「出口貨物報關單」上加蓋放行章,出口企業在取得檢驗證書或放行通知單後,在規定的有效期內報運出口, 根據進口商品登記規定,進口商品的檢驗分兩大類。

一類是列入《種類表》和合同規定由我國商檢機構檢驗出證的進口商品。進口商品到貨後,由收貨、用貨或其代理接運部門立即向口岸商檢機構報驗,填寫進口貨物檢驗申請書,並提供合同、發票、提單、裝箱單等有關資料和單證,檢驗機構接到報驗後,對該批貨物進行檢驗,合格後,在進口貨物報關單上加蓋印章,海關據此放行。

另一類是不屬上一類的進口商品,由收貨、用貨或代理接運部門所在地區的商檢機構申報進口商品檢驗,自行檢驗或由商檢機構檢驗,自行檢驗須在索賠期內將檢驗結果報送商檢機構,若檢驗不合 格應及時向商檢機構申請復驗並出證,以便向外商提出索賠。

(8)進口設備如何辦理商檢擴展閱讀:

首先由報驗人填寫「出口檢驗申請書」,並提供有關的單證和資料,如外貿合同、信用證、廠檢結果單正本等;商檢機構在審查上述單證符合要求後,受理該批商品的報驗;如發現有不合要求者,可要求申請人補充或修改有關條款。

由商檢機構派員主持進行,根據不同的貨物形態,採取隨機取樣方式抽取樣品,報驗人應提供存貨地點情況,並配合商檢人員做好抽樣工作。

商檢機構對檢驗合格的商品簽發檢驗證書,或在「出口貨物報關單」上加蓋放行章,出口企業在取得檢驗證書或放行通知單後,在規定的有效期內報運出口。

參考資料來源:網路-出口商檢流程

⑨ 要從國外進口機械設備手續怎樣辦理

看是否需要辦抄理機電證 機電襲證 是否是招標。 如果沒有這個疑問的話
再看你企業的性質和進口的目的
如果企業作為外資單位。 設備又是自用的 不做銷售用途 那麼你可以去注冊地海關咨詢辦理 免稅申請表。 當然你的這個設備如果在國家鼓勵項目范疇的話同樣能申請免稅表

⑩ 進口貨物,商檢是在貨物到之前還是貨物到之後啊,流程是怎麼的

進口商品檢驗主要經過以下過程:
1、在貨物到達目的地後,對列入「種類表」的進口商品報檢回。由答報檢單位填寫《進口商品檢驗申請單》,然後向當地商檢機構申請檢驗。報檢時應隨附下列單據或證件:A.外貿合同(副本)。B.商業發票。C.裝箱單。D.提單。E.進口貨物通知書。
如果申請檢驗的項目為品質與規格,還需提供國外品質證書、使用說明書及有關標准和技術資料;憑樣成交的商品,須提供成交樣品;如需申請殘損堅定的,須提供《貨物殘損報告單》或鐵路商務記錄等有關憑證;如需申請數量、重量鑒定的,還須提交發貨人提供的重量明細單、理貨清單等。
2、未列入「種類表」的進口商品,由收、用貨部門自行組織檢驗,並將檢驗結果告知當地商檢機構。加發現質量、數量等問題,應保持現狀,並向當地商檢機構報檢。
3、檢驗、出證。商檢機構受理上述報檢申請後,要及時進行檢驗,並在對外貿易合同約定的索賠期限內檢驗完畢,然後出證。經檢驗合格的,簽發《檢驗情況通知單》;不合格的,簽發《檢驗證書》,由收、用貨部門送訂貨公司辦理索賠手續。

閱讀全文

與進口設備如何辦理商檢相關的資料

熱點內容
steam令牌換設備了怎麼辦 瀏覽:246
新生測聽力儀器怎麼看結果 瀏覽:224
化學試驗排水集氣法的實驗裝置 瀏覽:156
家用水泵軸承位置漏水怎麼回事 瀏覽:131
羊水鏡設備多少錢一台 瀏覽:125
機械制圖里型鋼如何表示 瀏覽:19
測定空氣中氧氣含量實驗裝置如圖所示 瀏覽:718
超聲波換能器等級怎麼分 瀏覽:800
3萬軸承是什麼意思 瀏覽:110
鑫旺五金製品廠 瀏覽:861
蘇州四通閥製冷配件一般加多少 瀏覽:153
江北全套健身器材哪裡有 瀏覽:106
水表閥門不開怎麼辦 瀏覽:109
花冠儀表盤怎麼顯示時速 瀏覽:106
洗砂機多少錢一台18沃力機械 瀏覽:489
超聲波碎石用什麼材料 瀏覽:607
組裝實驗室製取二氧化碳的簡易裝置的方法 瀏覽:165
怎麼知道天然氣充不了閥門關閉 瀏覽:902
公司賣舊設備掛什麼科目 瀏覽:544
尚葉五金機電 瀏覽:59