① Linux怎樣查看一個設備是從哪個USB口接入的
ls -l /sys/bus/usb/devices/
查看下
② 怎麼查看linux usb設備驅動
下面的信息都是在VMware中運行Ubuntu12-04系統上執行的。同樣該命令也支持在嵌入式系統中進行USB調試。
一、cat設備節點獲取信息
在一些嵌入式開發中需要調試USB功能，經常會cat /sys 下的相關設備節點來查看某些信息，比如說我們可以看到 /sys/bus/usb/devices 目錄有多個子目錄。進入到某個子目錄可以看到usb設備更加詳細的信息(可以理解為設備描述符)。
1、usb設備在匯流排上的信息
// usb設備在匯流排上的信息
root@ubuntu:/sys/kernel/debug# cd /sys/bus/usb/devices
root@ubuntu:/sys/bus/usb/devices# ll
total 0
drwxr-xr-x 2 root root 0 Nov 26 21:21 ./
drwxr-xr-x 4 root root 0 Nov 26 21:21 ../
lrwxrwxrwx 1 root root 0 Nov 26 21:21 1-0:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-0:1.0/
lrwxrwxrwx 1 root root 0 Dec 15 23:10 1-1 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/
lrwxrwxrwx 1 root root 0 Dec 15 23:18 1-1:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-0:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-0:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-1 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-1:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-2 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-2:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 usb1 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 usb2 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/
其中 usbx/第x個匯流排，x-y:a.b/的目錄格式，x表示匯流排號，y表示埠，a表示配置，b表示介面。
具體解釋可以參照如下：
The names that begin with "usb" refer to USB controllers. More accurately, they refer to the "root hub" associated with each controller. The number is the USB bus number. In the example there is only one controller, so its bus is number 1. Hence the name "usb1".
"1-0:1.0" is a special case. It refers to the root hub's interface. This acts just like the interface in an actual hub an almost every respect; see below.
All the other entries refer to genuine USB devices and their interfaces. The devices are named by a scheme like this:
bus-port.port.port ...
In other words, the name starts with the bus number followed by a '-'. Then comes the sequence of port numbers for each of the intermediate hubs along the path to the device.
For example, "1-1" is a device plugged into bus 1, port 1. It happens to be a hub, and "1-1.3" is the device plugged into port 3 of that hub. That device is another hub, and "1-1.3.1" is the device plugged into its port 1.
The interfaces are indicated by suffixes having this form:
:config.interface
That is, a ':' followed by the configuration number followed by '.' followed by the interface number. In the above example, each of the devices is using configuration 1 and this configuration has only a single interface, number 0. So the interfaces show up as;
1-1:1.0 1-1.3:1.0 1-1.3.1:1.0
A hub will never have more than a single interface; that's part of the USB spec. But other devices can and do have multiple interfaces (and sometimes multiple configurations). Each interface gets its own entry in sysfs and can have its own driver.
2、特定設備的詳細信息
進入到某個目錄中去，可以看到該設備的詳細信息，可用cat命令獲取信息。
// usb設備的詳細信息
root@ubuntu:/sys/bus/usb/devices/usb1# ll
total 0
drwxr-xr-x 6 root root 0 Nov 26 21:21 ./
drwxr-xr-x 4 root root 0 Nov 26 21:21 ../
drwxr-xr-x 10 root root 0 Nov 26 21:21 1-0:1.0/
drwxr-xr-x 5 root root 0 Dec 15 23:10 1-1/
-rw-r--r-- 1 root root 4096 Dec 15 23:40 authorized
-rw-r--r-- 1 root root 4096 Dec 15 23:40 authorized_default
-rw-r--r-- 1 root root 4096 Dec 15 23:40 avoid_reset_quirk
-r--r--r-- 1 root root 4096 Nov 26 21:21 bcdDevice
-rw-r--r-- 1 root root 4096 Nov 26 21:21 bConfigurationValue
-r--r--r-- 1 root root 4096 Nov 26 21:21 bDeviceClass
-r--r--r-- 1 root root 4096 Nov 26 21:21 bDeviceProtocol
-r--r--r-- 1 root root 4096 Nov 26 21:21 bDeviceSubClass
-r--r--r-- 1 root root 4096 Dec 15 23:40 bmAttributes
-r--r--r-- 1 root root 4096 Dec 15 23:40 bMaxPacketSize0
-r--r--r-- 1 root root 4096 Dec 15 23:40 bMaxPower
-r--r--r-- 1 root root 4096 Dec 15 23:40 bNumConfigurations
-r--r--r-- 1 root root 4096 Dec 15 23:40 bNumInterfaces
-r--r--r-- 1 root root 4096 Nov 26 21:21 busnum
-r--r--r-- 1 root root 4096 Dec 15 23:40 configuration
-r--r--r-- 1 root root 65553 Nov 26 21:21 descriptors
-r--r--r-- 1 root root 4096 Dec 15 23:40 dev
-r--r--r-- 1 root root 4096 Nov 26 21:21 devnum
-r--r--r-- 1 root root 4096 Dec 15 23:40 devpath
lrwxrwxrwx 1 root root 0 Nov 27 20:06 driver -> ../../../../../bus/usb/drivers/usb/
drwxr-xr-x 3 root root 0 Dec 15 23:40 ep_00/
-r--r--r-- 1 root root 4096 Nov 26 21:21 idProct
-r--r--r-- 1 root root 4096 Nov 26 21:21 idVendor
-r--r--r-- 1 root root 4096 Dec 15 23:40 ltm_capable
-r--r--r-- 1 root root 4096 Nov 26 21:21 manufacturer
-r--r--r-- 1 root root 4096 Dec 15 23:40 maxchild
drwxr-xr-x 2 root root 0 Nov 26 21:21 power/
-r--r--r-- 1 root root 4096 Nov 26 21:21 proct
-r--r--r-- 1 root root 4096 Dec 15 23:40 quirks
-r--r--r-- 1 root root 4096 Nov 26 21:21 removable
--w------- 1 root root 4096 Dec 15 23:40 remove
-r--r--r-- 1 root root 4096 Nov 26 21:21 serial
-r--r--r-- 1 root root 4096 Nov 26 21:21 speed
lrwxrwxrwx 1 root root 0 Nov 26 21:21 subsystem -> ../../../../../bus/usb/
-rw-r--r-- 1 root root 4096 Nov 26 21:21 uevent
-r--r--r-- 1 root root 4096 Dec 15 23:40 urbnum
-r--r--r-- 1 root root 4096 Dec 15 23:40 version
二、使用debugfs
1、掛載 debugfs 到 /sys/kernel/debug 路徑下
root@ubuntu:mount -t debugfs none /sys/kernel/debug
2、執行上述步驟之後，在 /sys/kernel/debug 就會生成如下的文件
root@ubuntu:/sys/bus/usb/devices# cd /sys/kernel/debug/
root@ubuntu:/sys/kernel/debug# ll
total 0
drwx------ 22 root root 0 Nov 26 21:21 ./
drwxr-xr-x 7 root root 0 Nov 26 21:21 ../
drwxr-xr-x 2 root root 0 Nov 26 21:21 acpi/
drwxr-xr-x 32 root root 0 Dec 4 16:30 bdi/
drwxr-xr-x 2 root root 0 Nov 26 21:21 bluetooth/
drwxr-xr-x 2 root root 0 Nov 26 21:21 cleancache/
drwxr-xr-x 2 root root 0 Nov 26 21:21 dma_buf/
drwxr-xr-x 4 root root 0 Nov 26 21:21 dri/
drwxr-xr-x 2 root root 0 Nov 26 21:21 dynamic_debug/
drwxr-xr-x 2 root root 0 Nov 26 21:21 extfrag/
drwxr-xr-x 2 root root 0 Nov 26 21:21 frontswap/
-r--r--r-- 1 root root 0 Nov 26 21:21 gpio
drwxr-xr-x 3 root root 0 Nov 26 21:21 hid/
drwxr-xr-x 2 root root 0 Nov 26 21:21 kprobes/
drwxr-xr-x 3 root root 0 Nov 26 21:21 kvm-guest/
drwxr-xr-x 2 root root 0 Nov 26 21:21 mce/
drwxr-xr-x 2 root root 0 Nov 26 21:21 pinctrl/
-r--r--r-- 1 root root 0 Nov 26 21:21 pwm
drwxr-xr-x 2 root root 0 Nov 26 21:21 regmap/
drwxr-xr-x 3 root root 0 Nov 26 21:21 regulator/
-rw-r--r-- 1 root root 0 Nov 26 21:21 sched_features
-r--r--r-- 1 root root 0 Nov 26 21:21 sleep_time
-r--r--r-- 1 root root 0 Nov 26 21:21 suspend_stats
drwxr-xr-x 7 root root 0 Nov 26 21:21 tracing/
drwxr-xr-x 3 root root 0 Nov 26 21:21 usb/
drwxr-xr-x 2 root root 0 Nov 26 21:21 virtio-ports/
-r--r--r-- 1 root root 0 Nov 26 21:21 vmmemctl
-r--r--r-- 1 root root 0 Nov 26 21:21 wakeup_sources
drwxr-xr-x 2 root root 0 Nov 26 21:21 x86/
3、cat 設備節點
執行下述命令之後會以特定格式列印目前USB匯流排上所有USB設備的信息如下：
root@ubuntu:/sys/kernel/debug# cat usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.13
S: Manufacturer=Linux 3.13.0-32-generic uhci_hcd
S: Proct=UHCI Host Controller
S: SerialNumber=0000:02:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0e0f ProdID=0003 Rev= 1.03
S: Manufacturer=VMware
S: Proct=VMware Virtual USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 7
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0e0f ProdID=0002 Rev= 1.00
S: Proct=VMware Virtual USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.13
S: Manufacturer=Linux 3.13.0-32-generic ehci_hcd
S: Proct=EHCI Host Controller
S: SerialNumber=0000:02:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0129 Rev=39.60
S: Manufacturer=Generic
S: Proct=USB2.0-CRW
S: SerialNumber=20100201396000000
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=rts5139
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 3 Ivl=64ms
至於信息的詳細解析可以參照 Linux源代碼中 Documentation/usb/proc_usb_info.txt 文件。現摘錄其中對該格式的詳細解釋：
| | |__Proct ID code
| |__Vendor ID code
|__Device info tag #2
String descriptor info:
S: Manufacturer=ssss
| |__Manufacturer of this device as read from the device.
| For USB host controller drivers (virtual root hubs) this may
| be omitted, or (for newer drivers) will identify the kernel
| version and the driver which provi
③ linux操作系統怎麼識別USB介面設備
linux系統會自動識別USB介面為串口磁碟sda(通常為sda1，可通過fdisk -l命令查詢)，掛載就可回用。
例：新建掛載目錄答mkdir /mnt/usb，掛載mount /dev/sda1 /mnt/usb，用完卸載掛起點unmount /dev/sda1 /mnt/usb。
④ 請教，Linux怎樣查看usb設備的詳細信息
方法一：在/etc/init.d/rcS中添加mount -t usbfs none /proc/bus/usb.
方法二：在終端中輸入mount -t usbfs /proc/bus/usb /proc/bus/usb.
前提是在編譯內核時選中usb device filesystem。
#cat /proc/bus/usb /device
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.32.2-ltls ohci_hcd
S: Proct=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 1.25
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=160a ProdID=3184 Rev= 2.05
S: Manufacturer=VIA Networking Technologies, Inc.
S: Proct=VNT USB-802.11 Wireless LAN Adapter
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=vntwusb
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
⑤ linux操作系統怎麼識別USB介面設備
linux系統會自動識別USB介面為串口磁碟sda(通常為sda1，可通過fdisk
-l命令查詢)，掛載版就可用權。
例：新建掛載目錄mkdir
/mnt/usb，掛載mount
/dev/sda1
/mnt/usb，用完卸載掛起點unmount
/dev/sda1
/mnt/usb。
⑥ 在Linux上怎麼樣查看USB設備
在大多數Linux套件中，硬體識別最常用的兩個工具是Lspci和Lsusb。
Lspci工具可以顯示所有PCI匯流排信息回，並答列出與它們相連的硬體設備。Lspci對於集成音效卡和顯卡的X86主板尤其有用，因為它可以識別使用在主板PCI電路中的確切晶元。
Lsusb工具可提供USB匯流排和連接設備的同類信息。
USB設備一般表示為 /dev/sda 或/dev/hda1 等等
如果是USB存儲器，像硬碟分區那樣直接掛載即可
mount /dev/sda /mnt/sda
⑦ 在linux系統里，如何檢查新插入的USB設備是否被系統識別
方法一：在/etc/init.d/rcS中添加mount -t usbfs none /proc/bus/usb.
方法二：在shell中輸入mount -t usbfs /proc/bus/usb /proc/bus/usb.
前提是在編譯內核時選中usb device filesystem。
#cat /proc/bus/usb /device
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.32.2-ltls ohci_hcd
S: Proct=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 1.25
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=160a ProdID=3184 Rev= 2.05
S: Manufacturer=VIA Networking Technologies, Inc.
S: Proct=VNT USB-802.11 Wireless LAN Adapter
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=vntwusb
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
⑧ linux下如何區分多個USB鍵盤的輸入
要在你的程序里區分的話，需要調用RegisterRawInputDevices，這樣操作系統會把輸入消息直接以WM_INPUT的形版式給你，你權可以用GetRawInputData獲得消息的來源設備句柄。但是這也會造成你的程序接收不到正常的滑鼠鍵盤消息。
⑨ linux 區別同一個USB HUB上不同埠設備
usb設備一般是免驅的，但不是沒有驅動，在設備信息和驅動信息通過平台匯流排相互匹配時，默認是類型匹配，但是我們可以選擇 「設備廠商+產品號」的方式進行匹配，這樣就可以容易的分辨出不同的設備
⑩ 如何在Linux當中判斷USB控制器的類型
Linux不直接支持NTFS文件系統，如果U盤是NTFS文件系統就無法直接掛載使用。首先用lsblk列出所有塊內設備： 1 lsblk sd表示容SCSI磁碟，後面跟a，b，c之類的字母表示第幾個磁碟，字母之後再跟數字表示這個磁碟的第幾個分區。大部分人只有一個硬碟，此時再接一個U盤，這個U盤就是sdb，U盤上的分區就是sdb1。除此以外，還可以根據顯示的容量判斷U盤設備名是sdb還是sdc。其他情況以此類推。 然後可以在用戶目錄創建一個usb目錄：（也可以根據喜好設置在其他地方，下面的掛載地址跟著改變即可） 1 mkdir ~/usb1 最後把U盤分區掛載到這個目錄即可：（可能會提示輸入密碼，輸入密碼後回車即可） 1 sudo mount /dev/sdb1 ~/usb1 然後就可以通過訪問 ~/usb1目錄來訪問U盤： 1 2 cd ~/usb1 ls 最後要拔出U盤以前，要卸載U盤：（卸載時要退出usb1目錄，不然無法卸載）（可能會提示輸入密碼，輸入密碼後回車即可）