設備確認報告的英語怎麼說

㈠ 設備的英語單詞怎麼寫

設備equipment; implementor; apparatus; installation; appointment; furnishing; attachment 嘿~順便分享個免費的英語等級測試給你吧 http://www.douban.com/note/69322978/ 是個老外，挺有趣的喔~
採納哦

㈡ 英文「確認」怎麼寫的

英文「確認」：confirm

一、讀音：英[kən'fɜːm]美[kən'fɜːrm]

二、意思是：

v. (動詞)

確認，證實，證明，確定，肯定

批准，認可

加強

堅定，堅強

使更堅固，使鞏固

【律】使有效

【宗】給...行按手禮，給...施堅信禮

三、例句：

1、His letter confirmed everything.

他的信證實了一切。

2、The treaty was confirmed by the president.

條約已被總統批准。

(2)設備確認報告的英語怎麼說擴展閱讀

詞彙用法：

1、confirm的基本意思是「證實」「確定」,指以不可辯駁的事實或不容置疑的陳述證實某事的真實性、准確性、正確性以及有效程度，引申可表示為「認可」「堅定」。

2、confirm是及物動詞,其主語多為人,賓語可以是名詞、代詞或that從句,也可接以as短語充當補足語的復合賓語。

㈢ 麻煩英語高手幫忙翻譯一下。急！謝謝。。

21 inspection and testing proceres in the process of document examination enamel thickness in the process of documentation requirements they should test for 36 points Electrolux L'assomption, in fact test, the test only seven points. The proction staff of the Ministry of Ecation and Training
22 final inspection and testing proceres in the final document of the testing proceres and the size of the width has not been very good control, and a width or passed through the standards, but tests were neglected. See (BR-Electrolux-076) for staff The Department for Ecation and Training
23 life cycle for only a reliability test of a proct on a shelf, the frequency of testing should be based on the number of customers and the high number of complaints increased. There is no passenger appeal in this regard, not to consider the frequency of the Department of goods
24 CA of the final proct testing there is no evidence that the revised test the proct in order to continuously improve the information and re-read. To change practices, and continuously improve the effectiveness of inspection departments
25 test and the test results in the traceability of procts 3182791, a number of different departments and not part of the final test is confirmed. These inconsistencies related to flatness and surface should be confirmed. Under the control of demand and re-set the project for the Department
26 proct recall proceres rework / recall proceres and that has not been implemented. A re-examination of the operating proceres of the proction
27 inconsistent material Electrolux authorized proceres, according to AQL criteria for final inspection and non-performing ratio is not 0. So some bad goods in the absence of customers under the authorization of shipments. A re-examination of inspection reports for the Department
28 procts firm / all the steps and testing the composition of the test results identify and does not keep comprehensive information, such as enamel factory, the only identification number, date and status. To re-examine the reports of the Department of goods
29 traceability system in the foundry and enamel factory no good to establish traceability system. Identification does not have comprehensive information is related to operating instructions for the Department
30 special work of qualified employees enamel thickness of the test and final test were not professional. The operator training, "the Department of proction parts"
31-evaluation report can improve maintenance in the maintenance of the lack of action after the review process to improve the capacity. Increased equipment maintenance reports to confirm the result of maintenance
32 omitted part of the availability of major equipment replacement parts have not been identified and listed. Refresh Details of key equipment parts and maintenance of inventory ready
33 maintenance system, including the predictability of the method is still under consideration. Is still under consideration in the review.
34 MSA plans in the direction and control of all the tools of the MSA did not use the standard size and not the use of standard-size analysis, for example: Electrolux length and width of the ruler. Supplement the analysis for the Department
35-caliber size exceeded the appropriate action when there are no relevant caliper analysis and tracking of the increase recorded for the Department
36 operational projects / proceral changes document changes in some projects did not recall (for example: enamel thickness has been changed from 650 um to 600 um) is related to changes in the Department of goods
37 record retention time enamel thickness of only keep records for three months, when the time is too short can not occur when track. Changes for the Department for one year
38 Stat forms of learning and the ability to control or ca table and CPK no clear identification of the problem analysis and action to add information in this regard for the Department
39 appropriate corrective action can not find a root cause of the SCAR322 and their connection with the Electrolux other providers of inconsistency. Factory goods has improved the prevention of the Department of
40 trained solution to the lack of an effective corrective action plan to correct the proceres. Supplementary report in this regard to improve the Department of goods
41 resolve customer complaints and reports of L'A SCAR345 not an effective solution, and improvement measures to strengthen the inspection, but they are separated from each part of the proposed package and is not enforced. ITC has been with the Department of the Ministry of communication materials
42 corrective measures to improve the efficiency of Laws in the report there is no effective ways to correct them, and in SCAR322/330/345 also did not find a suitable improvement measures. Has been re-evaluation for the Department to improve
43 inconsistent report for preventive action there is no evidence that inconsistent report for the development of preventive action. Supplementary report in this regard for the Department

㈣ 英語翻譯急求 確認函

親愛的先生
我們上海金雅機械廠有限公司是hereupon非常總裝備部符合,我們將涵蓋了所有的成本費用芳苑男性19歲畢業於上海理工大學為他的研究在香港科技unirersity期間從2008年9月到2012年六月
真誠
Genzral經理

㈤ 品質報告中有一個8D報告的，哪8D用英文怎麼表示附加中文。

8D是解決問題的8條基本准則或稱8個工作步驟，但在實際應用中卻有9個步驟：
D0：徵兆緊急反應措施
D1：小組成立
D2：問題說明
D3：實施並驗證臨時措施
D4：確定並驗證根本原因
D5：選擇和驗證永久糾正措施
D6：實施永久糾正措施
D7：預防再發生
D8：小組祝賀

D0：徵兆緊急反應措施 目的:主要是為了看此類問題是否需要用8D來解決，如果問題太小，或是不適合用8D來解決的問題，例如價格，經費等等，這一步是針對問題發生時候的緊急反應。 關鍵要點: 判斷問題的類型、大小、范疇等等。與D3不同，D0是針對問題發生的反應，而D3是針對產品或服務問題本身的暫時應對措施。

D1：小組成立 目的:成立一個小組,小組成員具備工藝/產品的知識,有配給的時間並授予了許可權,同時應具有所要求的能解決問題和實施糾正措施的技術素質。小組必須有一個指導和小組長。 關鍵要點: 成員資格，具備工藝、產品的知識;目標 ;分工 ;程序 ;小組建設

D2：問題說明 目的:用量化的術語詳細說明與該問題有關的內/外部顧客抱怨,如什麼、地點、時間、程度、頻率等。 「什麼東西出了什麼問題」 方法：質量風險評定，FMEA分析 關鍵要點:收集和組織所有有關數據以說明問題;問題說明是所描述問題的特別有用的數據的總結;審核現有數據，識別問題、確定范圍;細分問題，將復雜問題細分為單個問題;問題定義，找到和顧客所確認問題一致的說明，「什麼東西出了什麼問題」，而原因又未知風險等級。
D3：實施並驗證臨時措施 目的:保證在永久糾正措施實施前，將問題與內外部顧客隔離。（原為唯一可選步驟，但發展至今都需採用） 方法：FMEA、DOE、PPM 關鍵要點: 評價緊急響應措施;找出和選擇最佳「臨時抑制措施」;決策 ;實施，並作好記錄;驗證（DOE、PPM分析、控制圖等）

D4：確定並驗證根本原因 目的:用統計工具列出可以用來解釋問題起因的所有潛在原因，將問題說明中提到的造成偏差的一系列事件或環境或原因相互隔離測試並確定產生問題的根本原因。 方法：FMEA、PPM、DOE、控制圖、5why法 關鍵要點: 評估可能原因列表中的每一個原因;原因可否使問題排除;驗證;控制計劃

D5：選擇並驗證永久糾正措施 目的:在生產前測試方案，並對方案進行評審以確定所選的校正措施能夠解決客戶問題，同時對其它過程不會有不良影響。 方法：FMEA 關鍵要點: 重新審視小組成員資格;決策，選擇最佳措施;重新評估臨時措施，如必要重新選擇;驗證;管理層承諾執行永久糾正措施;控制計劃

D6：實施永久糾正措施 目的:制定一個實施永久措施的計劃，確定過程式控制制方法並納入文件，以確保根本原因的消除。在生產中應用該措施時應監督其長期效果。 方法：防錯、統計控制 關鍵要點: 重新審視小組成員;執行永久糾正措施，廢除臨時措施;利用故障的可測量性確認故障已經排除;控制計劃、工藝文件修改

D7：預防再發生 目的:修改現有的管理系統、操作系統、工作慣例、設計與規程以防止這一問題與所有類似問題重復發生。 關鍵要點:選擇預防措施;驗證有效性;決策 ;組織、人員、設備、環境、材料、文件重新確定

D8：小組祝賀 目的:承認小組的集體努力，對小組工作進行總結並祝賀。 關鍵要點: 有選擇的保留重要文檔;流覽小組工作，將心得形成文件;了解小組對解決問題的集體力量，及對解決問題作出的貢獻;必要的物質、精神獎勵。

對8D工作方法的評價

1.優點 發現真正肇因的有效方法，並能夠採取針對性措施消除真正肇因，執行永久性矯正措施。 能夠幫助探索允許問題逃逸的控制系統。 逃逸點的研究有助於提高控制系統在問題再次出現時的監測能力。 預防機制的研究有助於幫助系統將問題控制在初級階段。

2.缺點 8D培訓費時，且本身具有難度。 除了對8D問題解決流程進行培訓外，還需要數據挖掘的培訓，以及對所需用到的分析工具（如帕累托圖、魚骨圖和流程圖，等等）進行培訓。[1]

㈥ 求高手翻譯英文

When the process output cannot performs the confirmation by thefollowing surveillance or the survey, this process should carry on theconfirmation, guarantees the process the output to be able to continuesatisfiedly to prearrange the request.
4.4.1 equipment control section is responsible for the equipment theinstallment to confirm that, the movement confirmed and the craftconfirmed is connected the parameter debugging, and makes the explicitstipulation to the equipment maintenance maintenance.
4.4.2 quality departments guarantee in carry on before theconfirmation all correlations measuring appliance to be qualifiedafter the calibration, and carries on the correlation sample theexamination.
4.4.3 technical departments basis examines the result carries on theanalysis, when the need to the plan carries on the change.
4.4.4 proction departments give the personnel, the material, thespace in the confirmation entire process and so on the coordination.

The process confirmed the result must form the record, usually shouldreport the form, examines and approves after general manager puts onfile.
4.7 technical departments should act according to confirmed the reportthe result, determined the best craft parameter uses in the dailyproction.

4 proceres
4.1 conventional contracts Routine Contract
4.1.1 thing flow the department after to receive the maincorporation the conventional contract, should organize the proctiondepartment and the financial department carries on the contractappraisal, the confirmation material purchase cycle and the stocksituation.
4.1.2 proction departments should to the proctivity, the deliverydate, the equipment, the personnel and so on carry on the appraisal,confirmed whether can according to the contract 交期 promptdelivery.
4.1.3 finance departments should confirm whether the contract pricedoes tally with the quoted price.
4.1.4 if the contract appraisal result for may accept, then the thingflows the department to be supposed promptly (usual form as email) toflow take the written form to the main corporation to carry on theconfirmation. If the contract after the appraisal thought cannotaccept, then the thing flows the department to be supposed promptly toflow with the main corporation to carry on the communication changecontract requirement or to abolish the contract.
4.1.5 once accepts the contract, the thing flows the department to besupposed to carry on the track to the contract progress situation. Ifthe contract carries on in the process to have any change, shouldrecord on the contract change list, and obtains the main corporationto flow a written approval.
After 4.1.6 contracts complete, all correlations recording (includingcontract, contract appraisal table, contract changes record and so on)to carry on the preservation by the material department, sees alsoQP02 "Recording Control" the procere.

4.2 special contracts Special Contract

4.2.1 thing flow the department after to receive the maincorporation the special contract, should organize the correlationdepartment to carry on the contract appraisal. Related departmentincluding technology, quality, proction, class, belongings, generalmanager and so on.
4.2.2 technical departments are responsible for the proctspecification which appraises under the main corporation to send iswhether complete, the specification generally includes proctmarking, the fitting chart, the proct assembly chart, the packingassembly chart and so on.
4.2.3 quality department are responsible to appraise the proctexamination standard whether complete, the check-out facility iswhether complete and so on.
4.2.4 proction departments should to the proctivity, the deliverydate, the equipment, the personnel and so on carry on the appraisal,confirmed whether can according to the contract 交期 promptdelivery.
4.2.5 thing flow to be responsible to appraise the material purchasecycle and the stock situation and so on.
4.2.6 finance departments should confirm whether the contract pricedoes tally and so on with the quoted price.
4.2.7 general managers are responsible for the contract the finallyexamination and approval.
4.2.8 if the contract appraisal result for may accept, then the thingflows the department to be supposed promptly (usual form as email) toflow take the written form to the main corporation to carry on theconfirmation. If the contract after the appraisal thought fuzzy orcannot accept, then the thing flows the department to be supposedpromptly to flow with the main corporation to carry on thecommunication request to clarify, the change contract requirement orto abolish the contract.
4.2.9 once accepts the contract, the thing flows the department to besupposed to carry on the track to the contract progress situation. Ifthe contract carries on in the process to have any change, shouldrecord on the contract change list, and obtains the main corporationto flow a written approval.
After 4.2.10 contracts complete, all correlations recording (includingcontract, contract appraisal table, contract changes record and so on)to carry on the preservation by the material department, sees also theQP02 recording control procere.
5. appendices
5.1 appendices 1 KQP16-F01A "Contract Appraisal Table"
5.2 appendices 2 KQP16-F02A "Contract Change List"
6. references
6.1 ISO13485:2003, medical instrument -- quality controlsystem -- standard request
6.221 CFR PART 820, quality control system standard

㈦ 求助英語翻譯

激光輻射安全 所有的激光裝置分配在表現標准取決於命令的美國公畝中為人和動物處理兩者.他們在分配產品((看見21 CFR1000-1040.11)之前必須遭遇聯邦的激光產品表現標准和必須去CDRH的順從的辦公室提交開頭的報告.這表現標准指定安全特徵為了提供適當安全向用戶和病人,和把那個說成是所有的激光產品必須有.一個激光產品製造商必須確認每一模範遵守把激光傳入美國貿易標准以前的事物.這個在裝置之前同意臨床的調查期間包含散發為使用. 一激光產品手段,每一單位已經一高質量保證試驗和那它通過的證明遵守表現標准.如同在第21段CFR 1000-1010中指定那樣,確認一激光產品的公司為產品報道,recordkeeping和通知負缺點,不順從和偶然輻射發生的責任.一個一激光產品的證明者被要求報告經由一份向CDRH提交激光產品報告產品的.報道指南和相關管理的信息是從DSMICA網站阿特得到:http://www.fda.gov/cdrh/devadvice.把任何確認激光產品分配國際地將也要求遞交報告. 2008年2月28日更新

㈧ 「質量檢驗報告」用英語怎麼說

質量檢驗報告 Performance test report
我們希望客戶能夠提供詳細的質量檢驗報告, 以便我們處理相關的事宜!
We hoped the customer can provide the detailed performance test report, in order to we process the related matters concerned!

㈨ 「中華人民共和國民用核安全設備活動境外單位注冊登記確認書」的官方名稱英語翻譯

中華人民共和國民用核安全設備活動境外單位注冊登記確認書
Confirmation of Registration of Overseas Units for Civil Nuclear Safety Equipment Activities of the People's Republic of China

㈩ 」確認」用英語怎麼說

確認:
affirm
countersign
notarize
validate
acknowledgement
affirmance

To admit of translation.
確認翻譯
To justify or prove.
確認確認並證實
Make ready; make sure.
准備好；確認
A letter of confirmation
確認函或確認書
command acknowledgments and responses
命令確認和響應
Confirmation of the shipment.
裝運確認書。
Identification of Ethnic Minorities
確認少數民族成分。
To locate or identify with precision.
精確地定位或確認
A recognition of their civil rights.
對他們人權的確認
To report the receipt of.
告知收到，確認收悉