1. 机械英语翻译
80 t LF炉短网出厂检验书
Delivery Inspection for 80t LF Furnace Short Net
产品名称
Proct name
LF炉短网
LF furnace short-net
规 格
Specifications
80t 出厂日期
80 t proction date
各 项 技 术 指 标 检 验 结 论
Inspection Results of various technical indexes
序号
Serial number
检验项目
Inspection items
标准要求
Standard requirements
测 试 结 论
Inspection results
导电横臂
Conctive cross arm
水冷铜管等
Water-cooled copper pipes
水冷电缆
Water-cooled electric cables
1 外观、装配尺寸
Appearance and assembly dimension
按《Q/HTY-002-94》第4．1项规定
comply with《Q/HTY-002-94》provision 4.1
2 绝缘电阻（MΩ）:
Insulation resistance (MΩ) :
在AC500V时≥1MΩ
≥1MΩ at AC500V
3 抗电强度:
Dielectric withstanding voltage,
3500V一分钟无击穿及飞弧
no breakdown and flashover within 1minute at 3500v.
4 夹头夹紧力（KN）
Clamping strength of clamping chuck
5 密封性
Sealing property,
水压≥0.6Mpa时无渗漏
No leakage under ≥0.6Mpa water pressure
6 电极园弧外表面吻合程度: ≤0.20mm
Arc anastomosis of electrode arc’s exterior surface : ≤0.20mm
7 安全要求
Safety requirements
按《Q/HTY-002-94第4.3项规定》
comply with 《Q/HTY-002-94》provision 43.
附：使用环境条件
Attachment: application environment conditions:
1. 变压器容量：
Transformer capacity
2. 电极直径:
Diameter of electrode:
3. 水压:0.25-0.4Mpa;
Water pressure: 0.25-0.4Mpa;
4. 水质:工业循环水。
Water quality: instrial circulation water
检 验 员 (签字)
Inspector:
技 术 员 (签字)
Technician:
检 验 日 期
Inspection date:
2. 机械专业怎么翻译中翻英
"Class designs and makes the gear wheel measurement experiment" Abstract: Gear wheel organization is that two axes or the motion between polyaxis composes in reply arbitrarily driving force apply the broadest transmission-mechanism, be used to transfer space in modern machinery. The design plan designing the teaching demanding to work out a gear wheel measuring an experiment according to the mission originally, handles an ability by the fact that FLASH , software system such as UG , Dreamweaver making multi-media teaching class , reaching the reality deepening the learner make of to course content and fostering a learner.
Keywords: Gear wheel; Experiment; Class; FLASH; Web pages.
3. 机械英语,怎么翻译
透过金属不可能看得见，因为这些价电子吸收所有到达金属的光子。
4. 机械专业的翻译
Through the market survey, currently in China, in addition to vacuum cleaner small indoor wide application, indoor use most cleaning tools are still mop, but these traditional broom and the low efficiency in cleaning tools, a large place labor intensity is high, and the high efficiency of large motor or clean vehicle, either the cleaning equipment, advanced cabinet, they are expensive and complex structure, suitable scope has quite limited.
This design by using the simple mechanical structure of pure, low cost, and puts forward a set of environmental clean car design, introces the principle, he mechanical parts and traditional scheme. In this design, the major of garbage, namely to junk transmission belt conveyor system design and analysis of transmission system, adjust and humanized design. In consideration of the normal work of belt conveyor based on the design of strength and stability, and the belt transmission system load is analyzed. Results prove the scheme design of strength and stability conditions. This proct design, operation is stable and reliable work, good efficacy. Clean
Keywords: environmental cleaning cars, V belt transmission, Conveyor belt, Belt wheel.
5. 机械英文翻译
Abstract
The graation project is the subject of radial drilling spindle hole drilling fixture design. This paper in accordance with the general steps fixture design, the design of some of the following:
Through the parts analysis, discussed the components of the machining process, process design and order the type of hair embryo. Part of the analysis through the development of mechanical parts processing line, that the choice of surface processing methods, principles and processing parts of the preparation. Fixture determine the overall plan, including processing methods, targeting programmes and positioning error analysis, clamping programme, cutting clamping force calculations.
Key words fixture design drill-processing technology.
6. 求机械专业英文翻译
纯手译， 个别地方可能翻译欠佳，供楼主参考。
Mechanical damage to soybean seed ring processing
Abstract
黄豆种子在加工过程中的机械损坏。
摘要
The effect of seed cleaning and handling on soybean seed germination and physical integrity were
determined with changing seed moisture content (m:c:).
黄豆种子清洁的效果以及质量方面的处理，是由种子含水量改变而决定的。
In addition, storage behavior of seed and loss of
storability caused by damage resulting from free-fall from different heights were determined.
另外， 种子存储方式以及可存储性由从不同高度下落造成的损坏所决定。
Six lots of the variety‘‘MA CS-13’’ at three different m:c:’s were passed through a vertical bucket elevator, cleaner with grader, and gravity separator and evaluated for mechanical damage, germination, and vigor index. The storage behavior of the lots, at different stages of processing, was studied by performing an accelerated aging test.
六批有三个不同含水量的 MA CS-13， 经过垂直的链斗升降机， 带有分级机的清洁机，重力分离机， 然后按照机械损伤、发芽状况以及种子活力评估。这批的存储方式在不同阶段的处理上有意的执行了一个加速老化试验。
The effect of free-fall on quality of the seed was studied by dropping six seed lots from four different heights on to cement and galvanized iron floors.
种子自由下落质量检测的效果是这样去衡量的，六个种子一组，从四个不同高度降落到水泥地和电镀铁地板上。
The vertical bucket elevator significantly decreased germination and increased splits and seed coat
damage.
垂直链斗升降机显著地减慢了发芽， 增加了种皮的裂开及损坏。
The seed lots at 12% m:c: (dry basis ), suffered less loss in seed quality than the lots at 10% or 11% m:c: The storage quality of seed, as predicted by the accelerated aging test, at 12% m.c. was also better than the lots at 10% or 11% m:c: A free-fall of soybean seed from different heights on to the cement floor resulted in greater loss in qualitythan when dropped on to the galvanized iron floor.
含水量在12%的那批（折干计算）种子，质量损失比含水量在10%和11%的种子少。 种子存储质量， 按照加速老化试验所预测的， 含水量为12%的种子比10%及11%都都要更好一些。黄豆种子从不同高度自由下落到水泥地上所造成的质量损失要比电镀铁板上的大。
2002 Elsevier Science Ltd. All rights reserved.
2002 Elsevier科技有限公司保持所有权利。
Keywords: Soybean; Processing; Mechanical damage; Germination; Moisture content
关键词： 黄豆， 处理， 机械损伤， 发芽， 含水量。
1. Introction
Soybean (Glycine max (L.) Merr.) is a protein- and oil-rich legume. It contains 40% protein and
20% oil along with calcium, iron, carotene, thiamine, and ascorbic acid. According to the ancient
written record of China, it was cultivated as early as 2000 BC (Probst and Judd, 1973). Its spread
1. 介绍
黄豆是一种富含蛋白质和油的豆类。它含有40%的蛋白质， 20%的油， 以及钙， 铁， 胡萝卜素，维生素b1， 抗坏血酸维生素C。 依照中国古代记录， 公元前2000年人们就开始种植它了。
Corresponding author. 联系作者：
Tel.: +1-204-474-6033; fax: +1-204-474-7512.
电话 传真
E-mail address: digvir [email protected] (D.S.Jayas).邮箱
0022-474X/02/$ - see front matter r 2002 Elsevier Science Ltd. All rights reserved.
PII: S 0 0 2 2 - 4 7 4 X ( 0 1 ) 0 0 0 4 0 - 6
7. 机械工具怎么翻译
mechanical apparatus.apparatus 专指器械，器具的意思，机械用具用这个词更贴切点
8. 机械 英语 翻译
摘 要
Pick to
人类已经进入机械化时代，在现代工业生产中，包装是工业生产中相当重要的环节，其中的产品贴标签在包装中又显得尤为重要。
Human beings have entered mechanization era, in the modern instrial proction, packaging is instrial proction in the link, which is very important in the proct label in packaging and is particularly important.
贴标机的功能就是能够对产品(这里指包装盒体)完成自动贴标工序。
Labeling machines function is able to procts (here refers to realize automatic packing body) label process.
即使产品实现机械化、自动化的根本保证，因此自动贴标签机在现代工业生产中起着相当重要的作用。
Even if the proct realize mechanization, automation, therefore the fundamental guarantee of automatic label machine in the modern instrial proction plays a very important role.
它可以大幅度提高生产效率；
It can greatly improve the proction efficiency;
降低劳动强度，改善劳动条件；
Rece the labor intensity, improve working conditions;
避免人手与产品的接触，有利于产品的卫生；
Avoid contact with procts with, to proct health;
减少工厂面积。
Rece factory area.
本设计主要介绍了一种平面贴标机，详细说明了贴标机的主要零件设计过程以及关键零部件强度的校核。
This design mainly introces a kind of planar labeling machines, detail the labeling machine main component design process and key components checking intensity.
根据本贴标机的工艺，可将贴标机的结构化分为纸盒输送装置、上糊机构、标签输送装置、标签裁断机构、贴标机构和控制装置六部分组成。
According to the marking machine technology, this can be the labeling machines into boxes structured conveying equipment, paste institutions, tag conveyer, labels, cutting institutions, labeling institutions and control device six parts.
具有以下特征：工艺操作和辅助操作，即纸盒的输送、上糊、标签的输送、标签的裁剪，全由贴标机各组成装置自动完成；
Has the following characteristics: process operation, and auxiliary operation, namely boxes on the conveyor, conveyors, paste, labels, tags out complete by labeling machine components device automatically;
贴标机按设定的工艺过程顺序自动地进行工作，其控制装置可进行贴标机自动工作的循环控制。
Labeling machines set according to process in order to work, the automatic control device can undertake labeling machines automatic work cycle control.
驱动装置采用的是直流电动机驱动，控制装置采用电控系统。
Driving device USES is the direct current motivation drive, control device adopts electrical control system.
自动工作机的自动控制装置采用的是机械式。
Automatic work machine automatic control equipment USES is mechanical.
针对平面贴标机的特点,对平面贴标机进行了系统的设计,并实现了贴标的全自动化。
According to the characteristics of planar labeling machines, labeling machines to plane in system design, and realized the automation stick mark.
关键词：全自动化 ；
Keywords: full automation;
上糊机构 ；
The paste institutions;
循环控制 ；
Cycle control;
机械式
mechanical
9. 机械用英文怎么翻译
engine; mechanical; machine; mechanism
10. 机械翻译
一个
mid-curve曲线偏移的内在界线。定义尘垢
建立的公差范围是由k + outtol…(intol)。
当k = 0.5,mid-curve分的公差范围
做事不可半途而废。这主要是由于它能够有效运用
精密机械加工补偿。最初的刀具
P1cl点,P2cl。。.Picl,产生了迭代
算法,从检查地点的螺旋分
(定义在极坐标各0.25的开始
角度)。如果任何点的曲率半径的超过一个
外部曲线或者是不到球的半径内曲线的
新的迭代步会启动。如果所有的点之间
内部和外部的曲线和最小距离
曲线是少于假定精度、迭代等方法治疗
成功,就会一直持续到明年的计算任务。通常,
3-5迭代步都必须达到的假设
结果的准确性。精度取决于的一小部分
(intol公差范围…),例如outtol + intol…。)(+ outtol)。